Preparation; Setting The Tv; How To Fix The Cables; How To Prevent The Lcd Tv Set From Falling Over - Sharp LC-AQUOS 20S5E-WH Operation Manual

Preparation

Setting the TV

Removing the terminal
cover
Pull down the hooks to open the
cover.
75-ohm coaxial cable
(round cable)
To antenna terminal ( )
Antenna terminal (
NOTE
• Unplug the AC cord from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of time.
• Please ensure your 75-ohm coaxial cable is fitted with a DIN 45325 (IEC169-2) coaxial plug and plug it into the antenna terminal at the rear of
the LCD TV set (antenna cable not supplied).

How to Fix the Cables

Secure cables and cords with the supplied cable
tie so that they do not get caught when mounting
the cover.
Cable tie
Rear view
)

How to Prevent the LCD TV Set from Falling Over

To prevent the LCD TV set from falling over in case of earthquakes and so on,
strap it onto the wall by threading one end of the string through the hook on the
LCD TV set (①) and fastening the LCD TV set with the string attached to the
hook on the wall or the post, etc. (②).
(An example of strapping the LCD TV set onto the wall is shown below.)
• The string and hook are commercially available.
Round lock for
Kensington Security
Standard slot*
* Using the Kensington Lock
• This LCD TV set has a
Kensington Security Standard
slot for use with a Kensington
MicroSaver Security System.
Refer to the information that
came with the system for
instructions on how to use it to
secure the LCD TV set.
Place the TV close to
the AC outlet, and keep
the power plug within
reach.
AC INPUT
terminal
(220-240 V)
AC cord
Product shape may vary
from country to country.
①
2
3
