Nicam Broadcasts Selection - Sharp LC-13C2H Operation Manual

NICAM BROADCASTS SELECTION

Enables selection of reception mode when receiving a NICAM signal.
POWER
DISPLAY
SLEEP BRIGHT
MENU
TV/VIDEO
VOL
CH
-/--
MPX
MPX
Notes:
If approximately 3 seconds pass without a button being pressed, the mode setting is automatically termi-
nated and the TV set returns to normal mode.
The setting can be selected individually for each channel position.
</>
POWER
DISPLAY
SLEEP BRIGHT
MENU
MENU
TV/VIDEO
]/[
VOL
CH
-/--
MPX
To let you enjoy NICAM broadcasting, this LCD
TV receives NICAM system stereo, bilingual, and
monaural broadcasts.
Stereo
TV set is receiving a stereo broadcast.
• Each time you press the MPX button, the mode
switches between NICAM STEREO and MONO.
When MONO is selected, the TV sound is
output in monaural.
Bilingual
TV set is receiving a bilingual broadcast.
• Pressing the MPX button changes the audio
mode in the order shown on the right.
• M1=main sound, M2=sub sound, or
MONO=monaural sound, can be selected.
Monaural
TV set is receiving a monaural broadcast.
• Each time you press the MPX button, the mode
switches between NICAM MONO and MONO.
If the sound quality is poor due to a weak signal or
other problems during NICAM broadcast reception,
set the "OFF" position of the NICAM to change the
TV sound to monaural.
1
Press the MENU to display the MENU
screen.
2
Press the ]/[ to select
"CH-SETTING".
3
Press the </> to display the CH-
SETTING menu.
4
Press the ]/[ to select "NICAM".
5
Press the </> to select "OFF".
When the NICAM sound is set to the
"OFF" position, the TV sound is output
in monaural.
Note:
When the NICAM sound is set to the "OFF" position, the MPX button
cannot be used to change the audio mode (stereo and bilingual settings).
49
(When stereo
sound is received)
NICAM
STEREO
49
MONO
(When main sound 49
is selected)
NICAM
M1
49
(When sub
sound is
selected)
NICAM
M2
49
(When monoural
sound is selected)
MONO
(When monoural 49
sound is received)
NICAM
MONO
49
MONO
CH-SETTING
RETURN
POSITION [CH15 ]
COLOUR SYSTEM [AUTO ]
SOUND SYSTEM [ I ]
SKIP [OFF ]
FINE [783.25MHz]
NICAM [OFF ]
IGR [ON ]
SELECT: ADJUST: EXIT:
MENU
(When off position is selected)
NICAM
15
[
23