Nicam Broadcast Selection; Ch Setup - Sharp LC-20AX7X Operation Manual

NICAM Broadcast Selection

To let you enjoy NICAM broadcasting, this LCD TV set
receives NICAM stereo system, bilingual, and monaural
broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press MPX, the mode changes between
"NICAM STEREO" and "MONO".
• When "MONO" is selected, the TV sound is output
monaurally.
(When stereo sound is received)
49
NICAM
STEREO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Pressing MPX changes the audio mode in the order
shown below.
• M1=main sound, M2=sub sound, or MONO=monaural
sound, can be selected.
(When main sound is received)
49
NICAM
M1
(When monaural sound is received)
Monaural
The LCD TV set is receiving a monaural broadcast.
• Each time you press MPX, the mode changes between
"NICAM MONO" and "MONO".
(When monaural sound is received)
49
NICAM
MONO
A
• The setting can be selected individually for each channel
number.
49
MONO
(When sub sound is received)
49
NICAM
M2
49
MONO
49
MONO
If the sound quality is poor due to a weak signal or other
problems during NICAM broadcast reception, set the "OFF"
position of the NICAM to change the TV sound to monaural.
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH SETUP", and press ENTER.
4
Press '/" to select "MANUAL", and press ENTER.
5
Press '/" to select "NICAM", and press \/| to
select "OFF".
• When the NICAM sound is set to the "OFF" position, the
TV sound is output in monaural.
6
Press MENU to exit.
(When the "OFF" position is selected)
A
• When the NICAM sound is set to the "OFF" position, MPX
cannot be used to change the audio mode (stereo and bilingual
settings).
25