Preset; On-Screen Display Language Selection; Presetting The Channels (Auto) - Sharp LC-13C2H Operation Manual

PRESET

On-Screen Display Language Selection

Front control panel
VOL CH
TV/VIDEO
MENU
2 PRESET 1
3

Presetting the Channels (AUTO)

VOL CH
TV/VIDEO
MENU
PRESET
2 1
2
POWER
DISPLAY
MENU
SLEEP BRIGHT
MENU
TV/VIDEO
VOL
CH
-/--
MPX
The MENU on the LCD TV set can
also be used to select the language.
1
Press the MENU front of the LCD
TV set for more than two seconds to
display the PRESET mode screen.
2
Press the MENU twice to display
the LANGUAGE select mode
screen. Press the MENU again to
change the PRESET mode as
1,2,4
shown below.
AUTO → MANUAL → LANGUAGE →
Note:
Instead pressing the MENU button more
than two seconds, you can display the
LANGUAGE select mode by selecting
FEATURE → LANGUAGE on the
Menu screen.
3
Press the CH (
the language you wish to display.
4
Press the MENU to return to the
normal screen.
Automatically tunes in and presets
receivable TV stations.
Make sure the antenna cable is
properly connected.
1
Press the MENU (PRESET-1)
front of LCD TV set for more than
two seconds. The AUTO mode
1
screen appears.
2
Press the VOL (+) (PRESET-2)
front of LCD TV set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
3
The screen shows whatever is on
channel 1 when full auto channel
preset is finished.
Notes:
When starting the PRESET after setting
the SOUND SYSTEM with the MENU
button of Remote Control, the SOUND
SYSTEM for all channels are stored into
memory.
Unused channels are automatically
skipped.
The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
NORMAL
SCREEN
)/( ) to select
U H F
4 7 1 . 2 5 M H z
LANGUAGE
ENGLISH
SELECT: EXIT:
MENU
(Auto mode screen)
Sound System
U H F
4 7 1 . 2 5 M H z
15