NICAM Broadcast Selection
To let you enjoy NICAM broadcasting, this LCD TV set receives
NICAM stereo system, bilingual and monaural broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press MPX, the mode changes between
"NICAM STEREO" and "MONO".
• When "MONO" is selected, the TV sound is output monaurally.
NICAM STEREO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Each time you press MPX, the mode changes as follows:
NICAM M1
MONO
Monaural
The LCD TV set is receiving a monaural broadcast.
• Each time you press MPX, the mode changes between
"NICAM MONO" and "MONO".
NICAM MONO
NOTE
• If approximately 3 seconds pass without a button being pressed,
the mode setting is automatically terminated and the LCD TV set
returns to the normal mode.
• The setting can be selected individually for each channel number.
MONO
NICAM M2
NICAM M1+M2
MONO
If the sound quality is poor due to a weak signal or other
problems during NICAM broadcast reception, set the "OFF"
position of the NICAM to change the TV sound to monaural.
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH SETUP", and press OK.
4
Press '/" to select "MANUAL", and press OK.
5
Press '/" to select "NICAM", and press \/| to select
"OFF".
P O S I T I O N
F I N E
C O L O U R
S Y S T E M
S O U N D
S Y S T E M
S K I P
N I C A M
A 2
• When the NICAM sound is set to the "OFF" position, the
TV sound is output in monaural.
6
Press MENU to exit.
(When the "OFF" position is selected)
15
NICAM
NOTE
• When the NICAM sound is set to the "OFF" position, MPX cannot
be used to change the audio mode between stereo and bilingual
setting.
1
8 7 1 . 1
0
M H Z
A U T O
B / G
O F F
O F F
O F F
19