Nicam Broadcasts Selection - Sharp Aquos LC-13B4M Operation Manual

NICAM BROADCASTS SELECTION

Enables selection of reception mode when receiving a NICAM signal.
BRIGHT TEXT
POWER TV/ VIDEO
T
SUBPAGE REVEAL
HOLD
SUBPAGE
SUBTITLE END
E
MENU MENU
MPX OK
SOUND MENU
M
MPX
VOL CH CH
TV/VIDEO
SLEEP DIS.MODE
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is automatically termi-
nated and the TV set returns to normal mode.
• The setting can be selected individually for each channel position.
BRIGHT TEXT
POWER TV/ VIDEO
</>
T
SUBPAGE REVEAL
HOLD SUBPAGE
SUBTITLE END
E
MENU MENU
MPX OK
SOUND MENU
M
MENU
]/[
MPX
VOL CH CH
TV/VIDEO
SLEEP DIS.MODE
Note:
• When the NICAM sound is set to the "OFF" position, MPX cannot be used to change the audio mode (stereo
and bilingual settings).
To let you enjoy NICAM broadcasting, this LCD
TV receives NICAM system stereo, bilingual, and
monaural broadcasts.
Stereo
TV set is receiving a stereo broadcast.
• Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
When MONO is selected, the TV sound is
output in monaural.
Bilingual
TV set is receiving a bilingual broadcast.
• Pressing MPX changes the audio mode in the
order shown on the right.
• M1=main sound, M2=sub sound, or
MONO=monaural sound, can be selected.
Monaural
TV set is receiving a monaural broadcast.
• Each time you press MPX, the mode switches
between NICAM MONO and MONO.
If the sound quality is poor due to a weak signal or
other problems during NICAM broadcast reception,
set the "OFF" position of the NICAM to change the
TV sound to monaural.
1
Press MENU to display the MENU
screen.
2
Press ]/[ to select
"CH-SETTING".
3
Press </> to display the
CH-SETTING menu.
4
Press ]/[ to select "NICAM".
5
Press </> to select "OFF".
When the NICAM sound is set to the
"OFF" position, the TV sound is output
in monaural.
49
(When stereo
sound is received)
NICAM
STEREO
49
MONO
(When main sound 49
is selected)
NICAM
M1
49
(When sub sound
is selected)
NICAM
M2
49
(When monaural
sound is selected)
MONO
(When monaural 49
sound is received)
NICAM
MONO
49
MONO
CH-SETTING
RETURN
POSITION [CH15 ]
COLOUR SYSTEM [AUTO ]
SOUND SYSTEM [B/G ]
SKIP [OFF ]
FINE [783.25MHz]
NICAM [OFF ]
IGR [ON ]
SELECT: ADJUST: EXIT:
(When off position is selected)
NICAM
MENU
15
[
25