Component Box Assemblies And Associated Component Parts - Frymaster H50 Series Service And Parts Manual

2.7

Component Box Assemblies and Associated Component Parts

IFB 806-3398 (Discontinued) has only one
fuse. If used with 807-3365 or 807-3366
modules, an in-line fuse should be added
between the module and the board.
Replaced by 106-0386
1
2
ITEM PART #
1 200-5996
2 807-1006
* 807-2971
3 807-3366
4 807-3365
5 807-0833
* 807-0834
6 807-3843
7 106-0386
* 806-4973
* 806-3683
* 106-3044
* 806-3641
* 806-4195SP
* 806-3535
8 807-1926
9 816-0217
10 810-1164
11 826-1359
12 826-1366
13 807-1241
14 809-0250
15 826-1337
16 826-1346
17 809-0441
* 826-1157
* 806-2071
* 806-3660
* 807-1359
* Not illustrated.
13
11
8
14
9
10
12
15
5
Box Assembly, One-Piece Component
Ignition Module, Full or Dual Vat (fuse-protected)
Ignition Module, Full or Dual Vat (fuse-protected) (Australian units only)
Ignition Module, Full Vat (unfused)
Ignition Module, Dual Vat (unfused)
Relay, 12V 5Amp Latch
Relay, 12V 5Amp Basket Lift
Fuse, 3A 250V Subminature
Interface Board (double fuse-protected)(use w/ 807-3365, 807-1006 or 807-3366)
Interface Board (used with 240V manufactured gas units only)
Interface Board (used with Ger. fryers with 24V blowers only)
Interface Board, FAST Computer
Interface Board, (used in Holland)
Interface Board, (used with manufactured gas Hong Kong)
Interface Board, (used in Churches w/ Far West Computers)
Bushing, .875 Diameter Split
Paper, Insulating (Items 9, 10, 11, 12 not used on Hong Kong units)
Block, Terminal (See Item 9)
Screw, 4-40 x ¾-inch Slotted Round Head (See Item 9) (Pkg. of 25)
Nut, 4-40 Keps Hex (See Item 9) (Pkg. of 25)
Spacer, Interface Board (.151-inch ID x ⅝-inch)
Nut, 6-32 Keps Hex
Tab, Push-On Terminal (Pkg. of 5)
Spacer, Ignition Module (.260-inch ID x ½-inch) (Pkg. of 10)
Screw, #7 x 1½-inch Slotted Washer Hex Head
Fuse Kit, Ignition Module 3 Amp (fuse and fuse puller)
Computer Cable 15-pin
Sound Device (For units with KFC1 Computers, use Speaker 807-1617)
Mount, Tie-Wrap (used on CE units only)
IFB 106-0386 (Item 7) has two
fuses and may be used with any
of the ignition modules.
6
7
7
Full vat units using one 807-3366 module
(Item 3) require only one latch relay (Item 5).
Full or dual vat units using two 807-1006,
807-2971, or 807-3365 modules require a
latch relay (Item 5) for each module.
16
6
2 5
17
COMPONENT
use 1 wire 1 connector ign. cable 826-2024
(use Relay Clip 810-2243 to secure relay in place)
(use Relay Clip 810-2243 to secure relay in place)
(uses 807-3969 latch relay in place of Item 5)
2-20
3
5
4
4
use 5A fuse 807-3293