Advertisement
CM4-S Cooking Computer Exit-Mode Programming
rogramming
P
Hint
The CM4-S can be
programmed to
return to setpoint,
cool to an idle
temperature or
prompt for filtering
at the end of a
cooking cycle.
1. After reaching the
first display of
Segment on
the computer
when
programming for
any mode of
operation, follow these steps to set the status the fry vat will assume
upon the completion of a cooking cycle.
2. Press hidden programming key twice. An Alarm prompt appears
upon the first push. Programming for alarms is covered in Section
5.
3. Ex Cycle appears in the left display upon the second push;
Filter, Set-Temp, or Set-Back appears in the right.
4. Press
to toggle between choices: with Filter chosen, the
fryer will prompt for filtration at the completion of the cooking
cycle; with Set-Temp chosen, the fryer will return to setpoint
upon the completion of the cooking cycle; with set-back
chosen, the fryer will assume an idle temperature well below
setpoint.
5. With the Set-temp or set-back displayed, press
lock in choice. Skip to step 9.
6. With Filter displayed, press
7. Num Filt shows in the left display; 0 or a previously
programmed number appears in the right.
8. Use product keys to enter number cook cycles between filtering
prompts for the product key being programmed. For example: if 10
is entered at the Num Filt prompt during programming of
product button 1, Filter will display on computer when product
button 1 is pressed for the 10
9. Segment appears in the left display; Prod and the button
number being programmed appear in the right.
10. Resume programming for filtering, non-filtering, segmented or non-
segmented cooking.
1
2
3
4
5
1
2
3
4
5
.
th
time. Press
6-1
6
7
8
9
10
6
7
8
9
10
CM4-S
Programming
button under
logo.
to
Advertisement
