Load Paper In The Optional High Capacity Feeder (Trays 6 And 7) - Xerox 4590 User Manual

Load paper in the optional High Capacity Feeder (Trays 6 and 7)

X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
Load paper with the side to be printed on facing up, and insert
3.
the paper lightly along the paper guide on the front side of the
machine until it comes to a stop.
KEY POINT: Do not load mixed size paper into the tray.
Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine trouble.
When loading a non-standard paper size from Tray 5
4.
(Bypass), move the paper guides to accommodate the paper.
Select printing.
5.
1. Pull out the tray towards you until it stops.
WARNING: When pulling out the paper tray, do it slowly. If pulled
out with too much force, the tray can hit and injure your knees.
Load and align the edge of the paper against the right edge
2.
of the tray with the side to be printed on facing up.
NOTE: Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine trouble.
2 . P ap er a nd o th e r m ed i a
2-9