Output Color; Paper Source; Print Mode - Xerox DocuPrint C525 A-AP Operation Manual

List of Items to be Set Specifically for this Printer
The following describes the functions specific to this printer that are included in the settings
that can be done in this Admin Menu.
Note
• The following terminology and different term may change when displayed depending on the Linux
distribution.
Basic

Output Color

Select [Color] or [Black] for [Output Color]. The default is [Color].
Important
• When [Color] is selected, documents are printed out in color even if the document is black and white.

Paper Source

Configure the paper source that is used for printing.
Only [Bypass Tray] can be selected when the paper tray (optional) is not attached. Other
paper sources cannot be selected.
The available options when the paper tray (optional) is attached are as follows:
[Auto] (default), [Tray 1 (250 Sheets)], [Tray 1 (500 Sheets)], [Tray 2 (500 Sheets)],
[Bypass Tray]
Note
• The paper source that is displayed differs according to the paper tray attached.
Paper Type for Bypass Tray
Set the type of paper when printing documents on the bypass tray.
The available options are as follows:
[Use Printer Settings] (default), [Plain], [Plain - Side 2], [Bond], [Bond - Side 2],
[Postcard], [Postcard - Side 2],
[Heavyweight 1 (106-163g/m2) ], [Heavyweight 1 - Side 2],
[Heavyweight 2 (164-216g/m2) ], [Heavyweight 2 - Side 2],
[Transparency], [Labels],
[Coated 1 (60-105g/m2) ], [Coated 1 - Side 2],
[Coated 2 (106-163g/m2) ], [Coated 2 - Side 2],
[Coated 3 (164-216g/m2) ], [Coated 3 - Side 2]
Important
• To set this item to an item other than [Use Printer Settings], [Paper Source] must be set to
[Bypass Tray].
• When [Paper Source] is set to [Bypass Tray], the paper setting becomes [Plain] when
[Use Printer Settings] is selected.
Preferred Paper Type
The specified paper type is automatically selected for printing from the paper source.
The available options are as follows:
[None] (default), [Plain], [Bond], [Coated 1 (60-105g/m2)]
Important
• To set this item to an item other than [None], [Paper Source] must be set to [Auto].

Print Mode

Select the print mode from [High Quality] or [High Speed]. With [High Quality], documents
are printed at 600dpi, and with [High Speed], documents are printed at 300dpi. The default
is [High Quality].
17