Xerox DocuMate 632 User Manual page 25

Xerox Scanner User's Guide
• Double-Feed Detection—select this option to have the scanner
detect when more than one page has fed through the scanner at
a single time.
• Action—Click on the arrow and select the action you want the
scanner to take when a double feed has been detected. Abort
stops scanning. Prompt tells you that a double feed has occurred.
2. Click on Apply to save the changes on the Page Settings tab.
3. If there are no other settings you want to change, click OK to save the
new configuration.
It will now be in the list of Scan Configurations on the One Touch
Properties window for the appropriate Destination Applications.
The Advanced Settings Tab
1. Click the Advanced Settings tab.
The options of the Advanced Settings tab are for the Color or
Grayscale scanning mode.
2. Drag the sliders to the left and right to change the color settings. As
you do, the image changes to show the effects of the new settings.
Saturation—the strength or purity of a color.
Hue—the color your eyes see as reflected from the image.
Gamma—controls the brightness of the midtone colors.
3. Click on Apply to save the changes on the Advanced Settings tab.
4. If there are no other settings you want to change, click OK to save the
new configuration.
It will now be in the list of Scan Configurations on the One Touch
Properties window for the appropriate Destination Applications.
Scanning from One Touch
21