Replacing The Adf Pad Assembly - Xerox DocuMate 632 User Manual

Replacing the ADF Pad Assembly

Xerox Scanner User's Guide
NOTE: When cleaning the glass, make sure to clean the thin strip of
glass next to the flatbed glass. This thin strip of glass is the area where
the ADF passes the paper across the glass. If lines appear on the images
scanned from the ADF, but not from the Flatbed, the glass may be dirty.
Clean the thin plate of glass
here when cleaning the flatbed
glass.
The ADF pad will wear out and is designed to be a user-replaceable part.
Problems with documents feeding into the ADF is an indication that the
pad is wearing thin.
To replace the ADF Pad assembly:
1. Open the ADF cover. The pad assembly is located inside the ADF.
Maintenance
49