Safety Notes - Xerox DocuPrint C2100 Quick Reference Manual

Xerox printers quick reference guide
Hide thumbs Also See for DocuPrint C2100:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Safety Notes

For your own safety, please read this page carefully before using the machine.
Graphic symbols used throughout this guide
A symbol for items to pay attention to when
handling the machine. Follow instructions
carefully to use machine safely.
A symbol for prohibited items. Follow instructions
carefully to avoid any dangerous acts.
A symbol for items that must be performed.
Follow instructions carefully to carry out these
essential tasks.
For Installation & Relocation
Do not place the machine in a hot, humid,
dusty, or poorly ventilated environment.
Prolonged exposure to these adverse
conditions can cause fire or electric shock.
Do not place the machine near heaters or
volatile, flammable, or combustible
materials such as curtains that may catch
fire.
Place the machine on a level and sturdy
surface that can withstand the machine
weight. If tilted, the machine may fall over
and cause injuries.
The machine weighs 26 kg. When moving
the equipment, make sure that there are
two or more persons carrying it.
6
Safety Notes
Used for items that if not followed strictly, can lead to severe or fatal injuries.
Used for items that if not followed strictly, can cause injuries to user or
damages to the machine.
Heated surface Flammable
Prohibited
No fire
Instructions
Unplug
When lifting the machine, one facing the
front of the machine (control panel) and the
other facing the back, should firmly grip the
recessed areas on the bottom part of both
sides of the machine. Never try to lift the
machine by gripping any other areas.
Lifting the machine by gripping any other
areas can cause the machine to fall and
result in injuries.
When lifting the machine, get a firm footing
and bend your knees to avoid possible
injuries to your back.
The machine has ventilation holes on the
side and rear panels. Ensure that the
machine is installed with a minimum
clearance of 100 mm from the rear vent to
Electric shock Pinched fingers
Do not
Do not
tear down
touch
Ground/Earth

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents