Blackberry Curve 8310 User Manual page 245

2. Click General Settings.
3. Set the Smart Password Entry field to Disabled.
4. Press the Menu key.
5. Click Save.
To turn on smart password entry again, set the Smart Password Entry field to Enabled.
Switch smart password filters
In a blank password field, press the Enter key.
The indicator for the new smart password filter appears beside the password field.
Prerequisites: Authentication certificates
• Check that the correct smart card driver and smart card reader driver are installed on your BlackBerry® device.
• Check that you have imported a certificate from your smart card that you can use for signing and verification. For more information,
see the user guide supplement for the S/MIME Support Package for BlackBerry® devices.
• Check that you have set a device password.
• Check that two-factor authentication is turned on.
• Check that you have the smart card password. You should have received this password when you received your smart card.
Use a certificate to authenticate your smart card
If you use a certificate to authenticate your smart card, the certificate authenticates your smart card whenever you use your smart card
to unlock your BlackBerry® device.
1. In the device options, click Security Options.
2. Click General Settings.
3. Set the Authentication Certificate field.
4. Press the Menu key.
5. Click Save.
To stop using a certificate to authenticate your smart card, set the Authentication Certificate field to None.
Check the status of your authentication certificate automatically
1. In the device options, click Security Options.
2. Click General Settings.
3. Change the Certificate Status Check field.
4. Press the Menu key.
5. Click Save.
If your BlackBerry® device checks the status of your authentication certificate and finds that it is revoked or expired, your device locks.
243