Getting Started; Set-Up - Alcatel OT-606 User Manual

Alcatel ot-606 mobile phone user manual
Hide thumbs Also See for OT-606:
Table of Contents

Advertisement

2

Getting started .....................

2.1

Set-up

Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls.
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
the bottom and slide it out. Please power off your phone before you
remove the SIM card.
(1)
Check with your network operator to make sure that your SIM card is 3V or
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
(1)
19
Installing or removing the battery
Insert and click the battery into place, then close the telephone cover.
Unclip the cover, then remove the battery.
Charging the battery
Connect the battery charger
Charging may take about 20 minutes to start if the battery is flat.
Be careful not to force the plug into the socket.
Make sure the battery is correctly inserted before connecting the
charger.
The mains socket must be near to the phone and easily accessible
(avoid electric extension cables).
20

Advertisement

Table of Contents
loading

Table of Contents