Table of Contents
Advertisement
3.2
Receiving a call
When you receive an incoming call, press the
hang up using the
key.
If the
icon is displayed, the vibrator is activated and there is no
ringtone. If the
icon is displayed, the phone neither rings nor vibrates.
The caller's number is displayed if it is transmitted by the network
(contact your network operator to check service availability).
Muting the ringtone
To mute ringtone of current incoming call, press
by pressing the
key.
Rejecting a call
Press the
key once, or reject it by SMS (Options\Reject call with
SMS).
(1)
3.3
During a call
During a call, following options are available:
- New call (Hold the current call and dial another number)
- Hold (Hold the current call)
- Mute (Mute the current call)
- DTMF (Enable/Disable sending DTMF during the call)
- Volume (Adjust the vloume level)
PROMPT: You may also adjust sound level by using
during a call.
(1)
Contact your network operator to check service availability.
key to talk and then
key. Answer the call
key directly
23
- Switch audio patch (Switch the audio path between the Bluetooth
headset and phone)
- Directory (Enter the directory)
- Messages (Enter Message Centre)
- Calendar (Enter Calendar)
- Services (Enter the Service menu)
- Sound recorder (record your current call).
You can switch the audio speech from handset to Bluetooth device when
connected.
You may also use Handsfree function with
WARNING: move the handset away from your ear while using the
"handsfree" option because the amplified volume might cause hearing
damage.
Handling two calls
•
Answering a second call (ensure that "Call waiting" is activated, see
page 40).
•
To call a second party during a call, dial the number directly.
3.4
Conference calls
Your phone allows you to talk to several people at the same time (up to
five). If you are on a double call, press "Options" and select
"Conference". If a third call comes in, answer it by pressing the
and speak with your new caller.
This caller becomes a member of the conference if you press "Options"
and select "Add to conference". Pressing
call.
To end the conference call, press "Options" and select "End conf.".
(1)
Contact your network operator to check service availability.
during a call.
(1)
disconnects the current
24
key
Advertisement
Table of Contents
