Getting Started - Alcatel 3080G Instructions Manual

• Press: Input "#"
• Long press: Vibrate mode on/off
• In edit mode
• Press: change the input method

1.2 Getting started

1.2.1 Set up
Inserting or removing the SIM/microSD card
Place the SIM card with the chip facing downwards and
slide it into its housing. Make sure that it is correctly
inserted. To remove the card, press it and slide it out.
Power off your phone before inserting or removing the
SIM/microSD card.
Charging the battery
Connect the battery charger to your phone and plug
into the socket.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before
connecting the charger.
• The mains socket must be near to the phone and
easily accessible (avoid electric extension cables).
25
To reduce power consumption and energy waste,
disconnect your charger when the battery is fully
charged; switch off Bluetooth. In Settings you can
also lower the brightness of the screen, and
shorten the length of time before the screen goes
to sleep.
1.2.2 Power on your phone
To turn your phone on, hold down the End key until the
phone powers on. It will take a few seconds before the
screen lights up. Unlock your phone with a password
26