Vcr To Av Tv Connection Using The S-Video Connection - Philips Show View VR1600 User Manual

VCR to AV TV Connection Using the S-video Connection

To obtain high-quality S-VHS pictures and Hi-Fi sounds, you can also use the S-VIDEO CONNECTION described below;
1) Complete the VCR to TV connection using the RF Connection.
2) Connect an S-Video/Audio cables between
the S-OUT/AUDIO OUT jacks
on the VCR and an S-Video/Audio input
jacks on a TV.
Notes:
• After you plug the AC power cord into an AC outlet, the Country Set
display appears on the TV screen and/or the display window on the VCR
when the STANDBY/ON (or POWER button on the remote control) is
pressed for the first time to power on the VCR. Go to page 10 to perform
Auto Set Up or Follow TV.
• If you are using a Decoder and/or Satellite Tuner, see page 42 and 43 also.
From antenna
OUT SYNCHRO EDIT
S
SORTIE MONTAGE SYNCHRO
IN/OUT
AUDIO ENTREE/SORTIE
L AV1 (L-1) IN/OUT
OUT
SORTIE
IN/DECODER
R
ENTREE/DECODEUR
RF OUT
PAUSE AV2 (L-2) IN/DECODER
TELEC. ANTENNE
LP30713-006
LP20916-006 SORTIE
S-Video Cable
— 9 —
Audio Cable
ANT. IN
ANTENNE
ENTREE
To TV
To S-Video and
audio input jacks