Dome Light Control; Silent Mode - Viper 1002 Owner's Manual

➜

dome light control

security only
The dome light activates for 30-seconds after the system is
disarmed.
Ignition controlled
The dome light activates for 30-seconds after the ignition is
turned Off.
door controlled
The dome light activates for 30-seconds after the system sees a
door has closed. (If door was held open for longer than 3
minutes the dome light will not illuminate.)
full
The dome light activates for 30-seconds after seeing door
closure, ignition, or security disarm. (This is the factory setting.)
➜

silent mode

To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
note: The Warn Away
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering. Only the Warn Away
14
for less than one second before
response to lighter impacts is
®
response is bypassed.
®
© 2006 directed electronics