Disarming Diagnostics; System Status Chirps - Viper 1002 Owner's Manual

➜

disarming diagnostics

Extra disarm chirps are the Tamper Alert. If four chirps are heard
when disarming, the system was triggered in your absence. If five
chirps are heard, a zone was triggered so many times that Nuisance
Prevention
®
this guide). The status LED will indicate which zone was involved.
(See Table of Zones section of this guide.) The system will retain this
information in its memory, and continue to chirp four or five times
each time it is disarmed, until the next time the ignition key is
turned on.
➜

system status chirps

The siren will chirp when arming/disarming the system. The
pattern of chirps will audibly report the system's status as
described below.
Action
Arm
Arm
Disarm
Disarm
Disarm
20
Circuitry has bypassed that zone (see NPC section of
Number of Chirps
1
1 (3-second delay), 1
2
4
5
Description
System armed
System armed with
Bypass Notification
System disarmed
System disarmed with
Tamper Alert
System disarmed NPC
active
© 2006 directed electronics
®