Table of Contents
Advertisement
CONTROLS AND FEATURES
PC Audio
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the "Connecting
a computer" section), and then use the PC/HDMI 3 Audio
setting.
a
In the Preferences menu, press
Connection and press OK.
b
B
b
Press
or
to select PC/HDMI 3 Audio and press
c
or
to select the PC option.
NOTE: Selecting the PC option will force HDMI 3
Audio to Digital mode.
Side Shared Audio
The AUDIO terminals for the COMPONENT VIDEO INPUT (EXT 2)
and VIDEO INPUT (EXT 3) are shared.
Select an appropriate option (EXT 2 or EXT 3) for the input that
you are using.
a
In the Preferences menu, press
Connection and press OK.
b
B
b
Press
or
to highlight Side Shared Audio, and
C
c
then press
or
to select EXT 2 or EXT 3.
HDMI 3 Audio
If the connected HDMI source does not support digital audio,
plug the audio cable into PC/HDMI 3 (AUDIO) on the back of
the television (as shown in the "Connecting an HDMI® or DVI
device to the HDMI input" section on page 9), then use the
HDMI 3 Audio setting.
a
In the Preferences menu, press
Connection and press OK.
b
B
b
Press
or
to select HDMI 3 Audio and press
c
to select Auto or Analogue.
AV Connection
Input Labeling
PC/HDMI 3 Audio
Side Shared Audio
HDMI 3 Audio
HDMI Settings
Digital Audio Output
If the sound is absent, try selecting a different setting.
NOTE: HDMI 3 supports digital and analogue sound,
HDMI 1, HDMI 2 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
B
b
or
to select AV
a
C
b
c
B
b
or
to select AV
• Enable Content Type: On
• INSTAPORT™: On
• RGB Range: Auto
B
b
or
to select AV
NOTE:
• If your HDMI connection is capable of 1080p and/or your
C
or
• All of the above HDMI settings need proper HDMI source
PC
EXT 2
Auto
When connecting a surround sound amplifier to the digital audio
a
74
HDMI Settings
Some early HDMI equipment may not work properly with your
HDMI TV. Please try setting the Enable Content Type and
INSTAPORT™ options to Off. Adjusting these settings should
allow your early HDMI source to operate properly with your
television.
In the Preferences menu, press
Connection and press OK.
B
b
Press
or
to select HDMI Settings and press OK.
NOTE: HDMI Settings is grayed out on non-HDMI
inputs.
B
b
Press
or
to select an item and press
select a setting.
HDMI Settings
Enable Content Type
INSTAPORT
TM
RGB Range
When set to On, the TV will automatically adjust
settings according to the content type data sent
from the connected HDMI device.
This feature reduces the lag time when switching
HDMI sources.
This feature adjusts RGB full range signal
automatically. When Limited is selected, RGB signal
is output in the range from 16 to 235. When Full is
selected, RGB signal is output in the range from 0 to
255.
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.
Digital Audio Output
output (Sony/Philips Digital Interface Format [S/PDIF]), the
following options can be selected or adjusted.
In the Preferences menu, press
Connection and press OK.
B
b
or
to select AV
C
c
or
to
On
On
Auto
B
b
or
to select AV
Advertisement
Table of Contents
