Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

 
Owner's Manual
Integrated High Definition
LCD Television
19AV600U
22AV600U
For an overview of steps for setting up your new TV, see page 9.
Note: To display a High Definition picture, the TV must be receiving
a High Definition signal (such as an over-the-air High Definition
TV broadcast, a High Definition digital cable program, or a High
Definition digital satellite program). For details, please contact
your TV antenna installer, cable provider, or satellite provider.
© 2009 TOSHIBA CORPORATION
All Rights Reserved
HIGH-DEFINITION TELEVISION
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
HDA51A1900I

Summary of Contents

  • Page 1

    Owner’s Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model number: Serial number: HDA51A1900I...

  • Page 2

    Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference.

  • Page 3: Important Safety Instructions, Installation, Care, And Service

    Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Page 4

    Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 31) If you use the TV in a room whose temperature is 32 °F (0 °C) or below, the picture brightness may vary until the LCD warms up.

  • Page 5

    Choosing a location for your LCD TV To Display your LCD TV on the included Pedestal Stand: Observe the following safety precautions: 1) Read and Follow the pedestal assembly instructions. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below. Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel. 2) Place the TV on a sturdy, level surface that can support the weight of the TV.

  • Page 6

    Consult the dealer or an experienced radio/TV technician for • help. Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate this equipment. ENERGY STAR ENERGY STAR User Information Statement: the factory default settings of this television meet ENERGY STAR requirements.

  • Page 7: Table Of Contents

    Specifications ...50 Acceptable signal formats for PC IN and HDMI terminals ..51 Limited United States Warranty for LCD Televisions (23” and smaller) – Depot Repair Warranty ...52 Limited Canadian Warranty for Toshiba Brand Flat Panel Televisions ...53 ® Digital Dynamic Range ...42...

  • Page 8: Chapter 1: Introduction, Features Of Your New Tv

    Features of your new TV The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV: Integrated digital tuning (8VSB ATSC and QAM) • eliminates the need for a separate digital converter set-top box (in most cases).

  • Page 9: Overview Of Steps For Installing, Setting Up And Using Your New Tv

    Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY. Do not plug in any power cords until AFTER you have connected all cables and devices to your TV.

  • Page 10: Tv Front And Side Panel Controls And Connections

    TV front and side panel controls and connections Model 19AV600U is used in this manual for illustration purposes. Control panel Green LED Power LED (Green) = Power indicator Remote sensor — Point the remote control toward this remote sensor ( “Remote control effective range” on page 19).

  • Page 11: Tv Back Panel Connections

    ColorStream high-definition component video inputs ® (with standard stereo audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream ® Note: Component video cables carry only video information; separate audio cables are required for a complete connection.

  • Page 12: Chapter 2: Connecting Your Tv, Overview Of Cable Types, About The Connection Illustrations

    Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream is Toshiba’s brand of component video.) These ® cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

  • Page 13: Connecting A Vcr (or A Vcr With S-video And Antenna, Cable Tv Or Camcorder

    Connecting a VCR (or a VCR with S-video) and antenna, Cable TV or Camcorder Camcorder TV back panel AUDIO VIDEO VIDEO 2 inputs on TV right side panel You will need: coaxial cables • S-video cable • − For better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) instead of the standard video cable.

  • Page 14

    Connecting a DVD player with ColorStream and a satellite receiver Your TV has two sets of ColorStream (component video) inputs. ® AUDIO COMPONENT VIDEO S-VIDEO VIDEO DVD player with component video From satellite dish AUDIO VIDEO COMPONENT VIDEO Satellite S-VIDEO Satellite receiver with component video You will need: coaxial cables...

  • Page 15: Connecting An Hdmi™ Or Dvi Device To The Hdmi Input

    Connecting an HDMI™ or DVI device to the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant...

  • Page 16: Regza-link ® Connection

    The REGZA-LINK feature uses the CEC technology as • regulated by the HDMI standard. This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those • perations. Refer to the individual instruction manuals for ompatibility information.

  • Page 17: Connecting A Digital Audio System, Connecting An Audio System

    Connecting a digital audio system The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby decoder or other external audio system with optical audio input. You will need: optical audio cable (Use an optical audio cable that has •...

  • Page 18: Connecting A Personal Computer (pc)

    Connecting a personal computer (PC) With either the PC IN or HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.

  • Page 19: Chapter 3: Using The Remote Control, Installing The Remote Control Batteries, Remote Control Effective Range

    Chapter 3: Using the remote control Installing the remote control batteries Remove the battery cover from the back of the remote control. Squeeze tab and lift cover. Install two “AAA” size batteries, making sure to match the + and – signs on the batteries to the signs on the battery compartment.

  • Page 20: Learning About The Remote Control

    Learning about the remote control The buttons used for operating the TV only are described here. Note: The error message “NOT AVAILABLE” may appear if you press a key for a function that is not available. POWER turns the TV on and off. When the TV is on, the green LED indicator on the TV front will be illuminated.

  • Page 21: Chapter 4: Menu Layout And Navigation, Main Menu Layout

    Chapter 4: Menu layout and navigation Main menu layout The tables below and on the next page provide a quick overview of your TV’s menu system. To open the main menus (illustrated below), press Icon Item Mode Video Picture Settings Noise Reduction Game Mode Theater Settings...

  • Page 22: Setup/installation Menu Layout, Navigating The Menu System

    Setup/Installation menu layout The Installation menu contains the Terrestrial and System Status menus. To open the Installation menu (illustrated below), press select Installation, and press Icon Item Input Configuration Terrestrial Channel Program Channel Add/Delete Channel Tuning Mode Time Zone Signal Meter System Status System Information Navigating the menu system...

  • Page 23: Chapter 5: Setting Up Your Tv, Setting The Energy Saving Mode, Selecting The Menu Language

    Chapter 5: Setting up your TV Setting the Energy Saving Mode When you first turn on the TV, the Menu Language, and Energy Saving Mode windows will appear by default. To select settings: 1� From the Menu Language selection window, highlight your preferred language and press Initial Setup Menu Language...

  • Page 24: Programming Channels Into The Tv's Channel Memory, Programming Channels Automatically

    Programming channels into the TV’s channel memory When you press on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV’s channel memory. Follow the steps below to program channels into the TV’s channel memory.

  • Page 25: Labeling Channels

    To manually add digital subchannels on a physical channel: Use the Channel Numbers and the Dash ( control to enter the channel number (for example, 56–1). If the channel is found, the number will be added to the list and the box will be checked. If the channel is not found, a message will appear.

  • Page 26: Setting The Hdmi™ Audio Mode

    To create and assign a custom label: 1� Open the Channel Labeling window. 2� Press to select a channel you want to label. 3� Press pqu to highlight Custom and press The software keyboard will appear. 4� Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software keyboard.

  • Page 27: Viewing The Digital Signal Meter, Setting The Time Zone, Viewing The System Status

    Viewing the digital signal meter You can view the digital signal meter in the ANT/CABLE digital TV input source only. To view the digital signal meter: and open the Setup menu. Press Highlight Installation and press A new set of Installation menu icons will appear. Open the Terrestrial menu, highlight Signal Meter, and press Press pqtu to select the antenna input and digital channel whose signal you want to check.

  • Page 28: Chapter : Using The Tv's Features, Selecting The Video Input Source To View

    Chapter 6: Using the TV’s features Selecting the video input source to view To select the video input source to view: Press on the remote control or TV control panel. And then either: a) Press 0–7; or b) Repeatedly press on the remote control and then ...

  • Page 29: Tuning Channels, Tuning Channels Using The Channel Browser

    Press to select the desired label for that input   source. If a particular input is not used, you can select Hide as the label, which will cause that input to be “grayed out” in the Input Selection screen and skipped over when you press on the remote control.

  • Page 30

    To set up the Channel Browser™: From the Preferences menu, highlight Channel Browser Setup and press to highlight Navigation, and then press Press  to select either Browse Mode or Select Mode. to highlight History List, and then press Press ...

  • Page 31: Setting The Channel Tuning Mode, Tuning To The Next Programmed Channel

    Adding and clearing channels and inputs in the History List Adding channels and inputs to the History List: As a channel or input is tuned, the Channel Browser™ adds it to the History List and displays it on the “right side” of the Channel Browser™.

  • Page 32: Switching Between Two Channels Using Channel Return, Switching Between Two Channels Using Surflock

    Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. Select the first channel you want to view. Select a second channel using the Channel Number buttons (and the dash ( ) button if selecting a digital channel).

  • Page 33

    Picture Size Natural Some program formats will display with sidebars and/or bars at the top and bottom. TheaterWide 1 (for 4:3 format programs) The center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen.

  • Page 34: Using The Auto Aspect Ratio Feature, Selecting The Cinema Mode, Using The Freeze Feature

    Scrolling the TheaterWide (TheaterWide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings: and open the Video menu. Press Highlight Theater Settings and press In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

  • Page 35: Adjusting The Picture, Selecting The Picture Mode, Adjusting The Picture Quality

    Adjusting the picture Selecting the picture mode You can select your desired picture settings from four different modes, as described below. Mode Picture Quality Sports Bright and dynamic picture (factory setting) Standard Standard picture settings (factory setting) Lower contrast for darkened room (factory Movie setting) Designed for viewing of PC tables and...

  • Page 36: Using The Closed Caption Mode, Base Closed Captions, Digital Cc Settings, Cc Selector

    Using the closed caption mode Base closed captions The closed caption mode has two options: Captions—An on-screen display of the dialogue, narration, • and sound effects of TV programs and videos that are closed captioned (usually marked “CC” in program guides). Text—An on-screen display of information not related to •...

  • Page 37: Using The Closed Caption Button On The Remote Control, Adjusting The Audio, Muting The Sound

    Using the Closed Caption button on the remote control If you press when an analog channel is tuned: The CC selector will be active and will display CC1-4 and • T1-4 as the options. The audio selector will be disabled. •...

  • Page 38: Adjusting The Audio Quality, Selecting The Optical Audio Output Format

    Adjusting the audio quality You can adjust the audio quality by adjusting the bass, treble, and balance. To adjust the audio quality: and open the Audio menu. Press Highlight Audio Settings and press Press to highlight the item you want to adjust ...

  • Page 39: Using The Locks Menu, Entering The Pin Code, If You Cannot Remember Your Pin Code

    Using the Locks menu The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Channels Block, Input Lock, Front (control) Panel Lock, and New PIN Code features. You can use these features after entering the correct PIN code. Entering the PIN code and highlight the Locks menu icon.

  • Page 40: Downloading An Additional Rating System For Blocking Tv Programs And Movies

    • The additional rating system is not designed, transmitted, or controlled by the TV or Toshiba, nor is the availability of an additional rating system determined or controlled by Toshiba. Similarly, the rating of programs in an additional rating system is not determined, transmitted, or controlled by the TV or Toshiba.

  • Page 41: Blocking Channels, Unlocking Programs Temporarily, Using The Input Lock Feature

    Blocking channels With the Channels Block feature, you can block specific channels. You will not be able to tune blocked channels unless you unlock them. To block channels: and highlight the Locks menu icon. Press Press to display the PIN code entering screen. ...

  • Page 42: Using The Gametimer, Using The Control Panel Lock Feature

    Using the GameTimer ® You can use the GameTimer to set a time limit for playing a video game (30–120 minutes). When the GameTimer expires, the TV enters Input Lock mode and locks out the input source for the video game device. To set the GameTimer ®...

  • Page 43: Using The Pc Settings Feature, Setting The Pc Audio, Setting The Sleep Timer

    Using the PC settings feature You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position.

  • Page 44: Control, Regza-link ® Input Source Selection, Volume And Mute Controls Of Audio Receiver

    Using REGZA-LINK ® This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote via HDMI connection ( page 15). When the Enable REGZA-LINK in the REGZA-LINK setup menu ( page 45) is set to On, the following REGZA-LINK functions will be enabled.

  • Page 45: Other Regza-link ® Functions, Displaying Tv Status Information, Understanding The Auto Power Off Feature

    ® Other REGZA-LINK functions When the Enable REGZA-LINK and each item in the REGZA-LINK Setup menu are set to On, the following functions will be enabled. Item Description TV Auto If a connected HDMI device starts playing Input video or audio, the TV will automatically Switch switch to the appropriate HDMI input.

  • Page 46: Chapter : Using The Tv's Advanced Features, Using The Advanced Picture Settings Features

    Chapter 7: Using the TV’s advanced features Using the advanced picture settings features Using dynamic contrast When dynamic contrast is set to On, the TV will detect changes in the picture quality that affect the appearance of your contrast settings and then automatically adjust the video. To select dynamic contrast preferences: and open the Video menu.

  • Page 47: Using Cableclear ® Digital Noise Reduction, Using Mpeg Noise Reduction, Using The Game Mode Feature

    Using CableClear digital noise reduction ® The CableClear digital noise reduction feature allows you ® to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

  • Page 48: Chapter 8: Troubleshooting, General Troubleshooting

    Chapter 8: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black box on-screen • The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4).

  • Page 49

    5 seconds. The PIN code you previously stored will be cleared ( page 39). No REGZA-LINK operation The REGZA-LINK feature is available for Toshiba • REGZA-LINK compatible devices. • Make sure the HDMI cables with the HDMI Logo ) are used.

  • Page 50: Chapter 9: Appendix, Specifications

    Ultra band (65 through 94, 100 through 135) Power Source: 120 V AC, 60 Hz Power Maximum Current 19AV600U: 0.6 A 22AV600U: 0.8 A Power Consumption 19AV600U: 0.4 W in standby mode 22AV600U: 0.4 W in standby mode Audio Power: 19AV600U: 3 W + 3 W 22AV600U: 3 W + 3 W Speaker Type: Two 2-7/8 ×...

  • Page 51: Acceptable Signal Formats For Pc In And Hdmi Terminals

    Acceptable signal formats for PC IN and HDMI terminals PC IN signal formats Note: Depending on the connected PC, the following status may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV. Format Resolution 640 ×...

  • Page 52: Limited United States Warranty For Lcd Televisions 23" And Smaller) – Depot Repair Warranty

    Limited United States Warranty for LCD Televisions (23” and smaller) – Depot Repair Warranty Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING...

  • Page 53: Limited Canadian Warranty For Toshiba Brand Flat Panel Televisions

    Modifications to the Television not approved in writing by TCL, and service made necessary by the use or installation of non-Toshiba modifications to the Television; h. Service of a Television on which the TOSHIBA label or logo, rating label or serial number have been defaced or removed;...

  • Page 54

    “Troubleshooting” section, you find that service is needed: (1) To find the nearest ASP, visit TCL’s web site at www.toshiba.ca, or call toll free 1-800-268-3404 (2) Present your bill of sale or other proof of purchase to the ASP.

  • Page 55

    Chapter 9: Appendix A copy of the GPL source code in this product may be obtained by contacting Toshiba Consumer Solutions at (800)631-3811. There will be a charge to cover the costs of providing the source code.

  • Page 56

    VANCOUVER: 6932 GREENWOOD STREET, BURNABY, B.C., V5A 1X8, CANADA – TEL: (604) 303-2500 CableClear, ColorStream, GameTimer, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. Channel Browser, DynaLight, and SurfLock are trademarks of Toshiba America Consumer Products, L.L.C.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: