Table of Contents
Advertisement
PC Audio
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the
'Connecting a computer' section), and then use the PC/HDMI 3
Audio setting.
a
In the PREFERENCES menu, press
Connection is highlighted, and then press
b
Highlight PC/HDMI 3 Audio, and then use
the PC option.
NOTE: Selecting the PC option will force HDMI 3
Audio to Digital mode.
HDMI 3 Audio
If the connected HDMI source does not support digital audio,
plug the audio cable into PC/HDMI 3 (AUDIO) on the back of
the television (as shown in the 'Connecting an HDMI
device to the HDMI input' section), then use the HDMI 3 Audio
setting.
a
In the AV Connection menu, press
HDMI 3 Audio and using
b
Then highlight HDMI 3 Audio, and using
select Auto or Analogue.
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
EXT 2 Input
Woofer
Digital Audio Output
If the sound is absent, try selecting a different setting.
NOTE: HDMI 3 supports digital and analogue sound,
HDMI 1, HDMI 2 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
b
until AV
Q
.
c
to select
®
or DVI
b
to highlight PC/
c
select HDMI 3.
C
c
or
HDMI 3
Auto
AV
Internal
Auto
63
HDMI Settings
Some early HDMI equipment may not work properly with your
HDMI TV. Please try setting the Enable Content Type and
INSTAPORT™ options to Off. Adjusting these settings should
allow your early HDMI source to operate properly with your
television.
a
In the PREFERENCES menu, press
Connection is highlighted, and then press
b
b
Press
to highlight HDMI Settings and press
NOTE: HDMI Settings is grayed out on non-HDMI
inputs.
c
B
b
Press
or
to select an item, and then press
to select a setting.
HDMI Settings
Enable Content Type
INSTAPORT
TM
RGB Range
• Enable Content Type: On
This feature is part of the HDMI1.4 standard.
When set to On, the TV will automatically adjust
settings according to the content type data sent from
the connected HDMI device.
• INSTAPORT™: On
This feature reduces the lag time when switching
HDMI sources.
• RGB Range: Auto
This feature adjusts RGB full range signal
automatically. When Limited is selected, RGB signal
is output in the range from 16 to 235. When Full is
selected, RGB signal is output in the range from 0 to
255.
NOTE:
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
• All of the above HDMI settings need proper HDMI source
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.
CONTROLS AND FEATURES
b
until AV
Q
.
Q
C
or
On
On
Auto
.
c
Advertisement
Table of Contents
