Table of Contents
Advertisement
A
DVANCED
Timer Recording
To record while you're away, follow steps 1 — 9
below. For each programme you set, the VCR will
turn on, start recording, and turn off automatically.
You can store up to 8 programmes.
Make sure....
• The clock is set to the correct time before
setting timer recording.
• A cassette is inserted in the VCR and the
record tab of the cassette must not be removed.
FOR EACH STEP BELOW, YOU NEED TO
FINISH WITHIN 60 SECONDS; OTHERWISE,
PROGRAMMING WILL HAVE TO BE
RESTARTED FROM STEP 1.
1
Select Timer Mode
1 Press VCR.
2 Press TIMER.
The Timer Recording menu
appears.
2
Select Programme mode
5
1 Press PLAY
or STOP
to select"QUICK PROG-
RAMMING" then press
OK/STATUS.
The Quick Programming
menu appears.
• If you have already made 8 programmes, "ALL
PROGRAMS IN USE" appears and goes back to
the Timer Recording menu. If this happens, delete
unwanted programmes. ( P.19)
3
Select Channel
5
∞
Press CH
or
to enter the
TV channel.
5
• Holding down CH
or
rapidly scans through the
channels.
• To record from external line input, press CH
until A/V REAR" or "A/V FRONT" appears.
4
Select Start Time
Press START + or –
(Number button 1 or 4).
• Each time you press the button,
the set time changes by 1-
minute intervals. If you hold the
button, the set time changes by 30-minute intervals.
220/75
O
PERATIONS
G-CODE
QUICK PROGRAMMING
PROGRAM REVIEW
SELECT:
CONFIRM: OK
END: TIMER
∞
ONE TIME PROGRAM
PROGRAM
1
CHANNEL+/–
– –
START +/–
– –:– – AM
STOP +/–
– –:– – AM
REC SPEED SP
DATE +/–
– –/– –/– –
DAILY: 8
WEEKLY: 9
CONFIRM: OK
END: TIMER
ONE TIME PROGRAM
PROGRAM
1
CHANNEL+/– 12
∞
START +/–
– –:– – AM
STOP +/–
– –:– – AM
REC SPEED SP
DATE +/–
– –/– –/– –
DAILY: 8
WEEKLY: 9
5
∞
CONFIRM: OK
END: TIMER
or
ONE TIME PROGRAM
PROGRAM
1
CHANNEL+/–
12
START +/–
08 : 00 PM
STOP +/–
– –:– – AM
REC SPEED SP
DATE +/–
– –/– –/– –
DAILY: 8
WEEKLY: 9
CONFIRM: OK
END: TIMER
— 18—
18
(
CONTINUED
5
Select Stop Time
Press STOP + or – (Number
button 2 or 5).
• Each time you press the button,
the set time changes by 1 minute
intervals. If you hold the button,
the set time changes by 30-minute intervals.
6
Select Tape Speed
Press ALT/SPEED.
• Each time you press the button,
the tape speed alternates
between "SP", "LP" and "SLP."
SP, LP : For PAL signal
SP, SLP : For NTSC signal
7
Select Start Date
Press DATE + or – (Number button
3 or 6).
• The year and day of the week is
displayed automatically.
8
Confirm Programme
Press OK/STATUS or TIMER.
"PROGRAM WAS COMPLETED" appears on
the TV screen.
After 5 seconds, the above message disappears,
and the normal TV picture resumes.
The
(Timer) indicator lights up on the display.
• If "PROGRAM NOT COMPLETED" appears, try
again from step 1.
• If "PROGRAM OVERLAPPED" appears, the timer
recording you just programmed overlaps another
timer recording. The Program Review screen will
appear with a magenta line blinking. To change any
item on the overlapping programs, see page 19.
If you want to store other programmes, repeat
steps 1 to 8.
01.5.11, 4:16 PM
)
ONE TIME PROGRAM
PROGRAM
1
CHANNEL+/–
12
START +/–
08 : 00 PM
STOP +/–
10 : 00 PM
REC SPEED SP
DATE +/–
– –/– –/– –
DAILY: 8
WEEKLY: 9
CONFIRM: OK
END: TIMER
ONE TIME PROGRAM
PROGRAM
1
12
CHANNEL+/–
START +/–
08 : 00 PM
STOP +/–
10 : 00 PM
REC SPEED LP
DATE +/–
– –/– –/– –
DAILY: 8
WEEKLY: 9
CONFIRM: OK
END: TIMER
ONE TIME PROGRAM
PROGRAM
1
CHANNEL+/–
12
START +/–
08 : 00 PM
STOP +/–
10 : 00 PM
REC SPEED LP
DATE +/–
20/07/01
FRIDAY
DAILY: 8
WEEKLY: 9
CONFIRM: OK
END: TIMER
Advertisement
Table of Contents
