Table of Contents
Advertisement
B
O
ASIC
PERATIONS
Selecting Colour Mode
Before using the VCR, you need to set the colour
mode both for recording and playback.
Press COLOUR MODE on the front panel for
more than 2 seconds. The current setting will
appear on screen for about 5 seconds. While the
current setting appears, press COLOUR MODE
repeatedly. The setting changes as follows;
For recording:
AUTO: Normally select this mode. The colour
system is automatically detected.
NTSC3.58: Select this mode if "AUTO" does
not work well when recording the
NTSC signals. (For playback on an
NTSC TV)
NTSC4.43: Select this mode if "AUTO" does
not work well when recording the
NTSC signals on the PAL TV. (For
playback on a PAL TV)
PAL:
Select this mode if "AUTO" does not
work well when recording the PAL
signals.
MESECAM: Select this mode if "AUTO" does
not work well when recording the
SECAM signals.
For playback:
AUTO: Normally select this mode.
When you watch a PAL, NTSC or
MESECAM tape, the colour system is
automatically detected.
NTSC3.58: Select this mode when you watch
an NTSC3.58 tape on an NTSC TV.
NTSC4.43: Select this mode when you watch
= = = = =
an NTSC4.43 tape on a PAL TV.
NTSC
PAL TV: Select this mode when you
watch an NTSC3.58 tape on a PAL
TV.
PAL:
Select this mode if "AUTO" does not
work well when playing back a PAL
tape.
MESECAM: Select this mode if "AUTO" does
not work well when playing back a
MESECAM tape.
When playing back an NTSC tape with "AUTO" mode
selected
The tape is played back using "NTSC3.58" mode.
220/75
Playback
1
On TV
1 Turn on the TV.
2 Select the video channel (or AV mode).
2
On VCR
Insert a cassette.
The VCR turns on.
• If the record tab on a cassette is removed, playback
will start automatically.
• If a cassette is already in the VCR, turn on the VCR.
3
Start Playback
Press PLAY
To rapidly locate a particular scene
Press FF
sound comes out.)
To resume playback, press PLAY
• If FF
seconds, simply releasing it will cancel the search.
To stop playback
Press STOP
To rewind the tape
Press REW
To fast forward the tape
Press FF
To eject the tape
Press EJECT
To turn off the VCR
Press POWER f.
When playing back an NTSC tape on a PAL TV
• Some TVs shrink the picture vertically and place
black bars at the top and the bottom of the TV screen.
• The time counter and remaining tape length will not
be correct.
— 11—
11
3
.
¡
1
or REW
during playback. (No
¡
1
or REW
is held down for more than 2
7
.
1
when the tape is not running.
¡
when the tape is not running.
0
.
01.5.11, 4:16 PM
3
again.
Advertisement
Table of Contents
