Check Memory; Checking Memory - Philips VR20D/07 User Manual

Checking Memory

You can check the amount of recorded information in the
memory.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS TAPE MANAGER
SCREEN
2
Press % fi to move the
highlight bar (pointer) to
"TAPE MANAGER", then
#
press OK or .

CHECK MEMORY

3
Press % fi to move the
highlight bar (pointer) to
"CHECKING MEMORY",
#
then press OK or
The CHECKING
MEMORY screen will
appear.
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
TAPE MANAGER
[5 ∞ ] =
[MENU] : EXIT
TAPE MANAGER
EDITING
SORTING
.
CHECKING MEMORY
TAPE MANAGER
[5∞] =
[MENU] : EXIT
CHECKING MEMORY
0
[MENU] : EXIT
Turn Off Tape Manager
If you don't want to record information on the programmes, set
"TAPE MANAGER" to "OFF".
Perform steps 1 to 2 of "Checking Memory" in the left
column before continuing.
TURN OFF TAPE MANAGER
1
Press % fi to move the
highlight bar (pointer) to
"TAPE MANAGER", then
press OK or
"OFF".
RETURN TO NORMAL
SCREEN
2
Press MENU.
NOTES:
Tape Manager is possible with the cassettes recorded with this
recorder only.
: ON
To record the date and time as the programme title in this
recorder's memory, make sure the recorder's clock is set
correctly before recording.
To record the programme information in this recorder's
memory, you must record each programme for over the
minimum recording time; 10 min. for the D-VHS (STD) mode,
30 min. for the D-VHS (LS3) mode, 8 min. for the S-VHS/VHS
(SP) mode or 15 min. for the S-VHS/VHS (LP) mode.
Tape Manager may not work properly depending on the
cassette being used.
100
If the recorder finds two tape numbers in one tape while
playing back or searching for the beginning of a programme,
then when you remove the tape, the tape will be assigned just
one number (smaller number).
The programme information is stored in this recorder's
memory. If the memory in this recorder should ever be
damaged and the programme information lost, it is impossible
to restore that information.
After recording a tape with this recorder, write the tape
number on a label and affix the label to the cassette in order
to allow you to find the tape by its number.
TAPE MANAGER
EDITING
SORTING
#
to set to
CHECKING MEMORY
TAPE MANAGER
[5∞] =
[MENU] : EXIT
39
EN
: OFF