Philips VR20D/07 User Manual page 12

A
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
Recorder
C
TV Receiver
(AV mode)
S-Video Cable
(provided)
Audio Cable
(not provided)
Player
NOTES:
All necessary cables can be obtained from your dealer.
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (
If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder's S-VIDEO and AUDIO input/output connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S-VIDEO and AUDIO output connectors to the recording deck's S-Video and Audio input connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its rear panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors.
Then, set the recorder's input mode to "S-1".
Player Your recorder
21-pin SCART
Cable (provided)
Another recorder
Recorder Your recorder
21-pin SCART
Cable (provided)
Another recorder
B
Recorder Your recorder
21-pin SCART
Cable (provided)
Another recorder
Player
49
EN
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
pg. 12).