Table of Contents
Advertisement
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
button.
TV/STANDBY m
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, 'TIMER RECORD' will flash on the TV
screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, 'NO CASSETTE'
will appear on the TV screen and '
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If 'TIMER FULL' appears on the TV screen when
you press the
button, you have used up all
TIMER
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
select it with the
P q
or
D Programme numbers 'E1' and 'E2' are for
recordings from other sources (through scart socket
or
EXT.1 AV 1
EXT.2 AV 2
k
' will flash on the
P r
button.
).
How to check or change a programmed
recording (TIMER)
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
button on the remote control twice.
TIMER
c
Select the programmed recording (TIMER) you want to
check or change with the
d
Press the
button.
TIMER
e
Select the entry field with the
button.
f
Change any information with the
with the
buttons.
0-9
g
Confirm with the
button.
OK
h
Make sure that the cassette you have put in can be
recorded on. Switch off with the
D The programmed recording will only function when
the video recorder is switched off with the
button.
TV/STANDBY m
D The video recorder will always record the
programmed recording at the speed you have
selected before the recording starts.
How to clear a programmed recording
(TIMER)
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
button on the remote control twice.
TIMER
c
Select the programmed recording (TIMER) you want to
clear with the
P r
or
d
Press the
CLEAR (CL), y
e
Confirm with the
button.
OK
or
button.
P q
P r
D/Sr
or
C/Sq
or
button or
P r
P q
TV/STANDBY m
button.
P q
button.
button.
17
Advertisement
Table of Contents
