1-2
Product Specifications
CPU
Hyper Transport Bus
Chipset
North Bridge: AMD 890FX
South Bridge: AMD SB850
Memory
Audio Realtek ALC889 codec
Support for S/PDIF In/Out
LAN
Expansion Slots
Multi-Graphics
Technology
Storage Interface
Hardware Installation
Support for AM3 processors:
AMD Phenom
II processor/ AMD Athlon
™
(Go to GIGABYTE's website for the latest CPU support list.)
5200 MT/s
4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
Dual channel memory architecture
Support for DDR3 1866 (O.C.)/1333/1066 MHz memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and
memory modules)
High Definition Audio
2/4/5.1/7.1-channel
Support for Dolby
Support for CD In
2 x Realtek RTL8111D chips (10/100/1000 Mbit)
Support for Teaming
Support for Smart Dual LAN
2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
1 x PCI Express x16 slot, running at x8 (PCIEX8)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
2 x PCI Express x1 slots
(All PCI Express slots conform to the PCI Express 2.0)
1 x PCI slot
Support for 2-Way/3-Way ATI CrossFireX
South Bridge:
-
6 x SATA 6Gb/s connectors (SATA3_0~SATA3_5) supporting up to 6 SATA
6Gb/s devices
-
Support for SATA RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
GIGABYTE SATA2 chip:
-
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
-
2 x SATA 3Gb/s connectors (GSATA2_6, GSATA2_7) supporting up to 2
SATA 3Gb/s devices
-
Support for SATA RAID 0, RAID 1, and JBOD
JMicron JMB362 chip:
-
2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup-
porting up to 2 SATA 3Gb/s devices
-
Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8720 chip:
-
1 x floppy disk drive connector supporting up to 1 floppy disk drive
Home Theater
®
- 10 -
II processor
™
(Note 3)
technology
™
(Note 1)
(Note 2)