Standard Cmos Features - Gigabyte GA-890FXA-UD5 User Manual

2-4

Standard CMOS Features

Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 1 Master
 IDE Channel 1 Slave
 IDE Channel 2 Master
 IDE Channel 2 Slave
 IDE Channel 4 Master
 IDE Channel 4 Slave
 IDE Channel 5 Master
 IDE Channel 5 Slave
 IDE Channel 7 Master
 IDE Channel 7 Slave
Drive A
Floppy 3 Mode Support
higf : Move Enter: Select
F5: Previous Values
Halt On
Base Memory
Extended Memory
higf : Move Enter: Select
F5: Previous Values
Date (mm:dd:yy)
Sets the system date. The date format is week (read-only), month, date and year. Select the desired field
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or
down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your IDE/SATA devices by using one of the two methods below:
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Wed, Mar 24 2010
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
F10: Save
[All, But Keyboard]
640K
1022M
F10: Save
- 45 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup