Gigabyte GA-890FXA-UD5 User Manual page 92

In Windows mode:
Steps:
1: Use an alternative system and insert the motherboard driver disk.
2: From your optical drive folder, double click the Menu.exe file in the BootDrv folder (Figure 3). A Command
Prompt window will open similar to that in Figure 4.
3: Insert the blank formatted disk. Depending on the operating system to be installed, select the controller
driver by pressing the corresponding letter from the menu and press <Enter>. For example, from the menu
in Figure 4,
• For the AMD SB850, select 3) ATi AHCI/RAID Driver for XP for Windows XP operating system.
• For the GIGABYTE SATA2/JMicron JMB362, select 1) GIGABYTE GSATA driver for 32bit system for
Windows 32-bit operating system.
Your system will then automatically copy the driver files to the floppy disk. Press any key to exit when finished.
Figure 3
Appendix - 92 -
Figure 4