Correcting Keystone Distortion Manually So That The Projection Area Fits The Screen Exactly (Quick Corner) - Epson EMP-7800 User Manual

Adjusting the Screen Image
Correcting Keystone Distortion so that the Projection
Area Fits the Screen Exactly (Quick Corner)
Quick Corner correction can be carried out using either the projector's
control panel or the configuration menus. This procedure explains how to
use the projector's control panel to correct keystone distortion.
If using the configuration menu: "Setting" - "Keystone" - "Quick Corner"
p.82
TIP
If "H/V-Keystone" is selected in the "Keystone" sub-menu of the
"Setting" menu, the "V-Keystone" or "H-Keystone" adjustment gauge
will be displayed if you press the [
p.45
When carrying out "Quick Corner" correction, select "Quick Corner"
and then make the correction.
PROCEDURE
Press the [ ], [
1
projector's control panel.
The Quick Corner correction screen will be displayed.
], [ ], [ ] or [ ] buttons.
p.82
], [ ] or [ ] button on the
[ / ]:Adjust
[ ] :Move next
[ESC] :Return (Press 1 second to
reset)
Press the [Auto/Enter] button on the projector's
2
control panel and then select the corner to be
corrected on the screen.
You can also press the [Enter] button on the remote control to
select the corner.
[ ]:Adjust
/
[ ] :Move next
[ESC] :Return (Press 1 second to
reset)
47
The selected
angle will
appear yellow.