Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
TIP
When a user's logo is recorded, the previous user's logo will be
erased.
PROCEDURE
Project the image that you would like to use as a
1
user's logo, and then press the [Menu] button on
either the remote control or the projector's control
panel.
Select the "User's Logo" menu, and then press the
2
[Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel.
Video
Audio
Effect
Setting
User's Logo
Advanced1
Advanced2
About
Reset All
[
]: Select
[
]: Execute
[
]: Select
Execute
[Menu]: Exit
TIP
If keystone correction or the E-Zoom function have been used, they
will be cancelled when the "User's Logo" menu is selected.
Select "Yes" in the sub-menu, and then press the
3
[Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel.
User's Logo
Accept the present image as user's logo?
YES
TIP
When you press the [Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel, the images will be
projected at their original image signal resolution, so that when you
are projecting images which have a resolution that is different from
the number of pixels on the projector's panel, and when you are
projecting video images, the display size will change.
NO
132