Adjusting Projected Images
Correcting keystone distortion in horizontal directions
Press the [
][
] buttons on the control panel.
a
You can set manual H/V-Keystone from the Configuration menu.
s Settings - Keystone - H/V-Keystone
Correcting manually (Quick Corner)
This allows you to manually correct each of the four corners of the
projected image separately.
p.76
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
Using the remote control
b
Select Keystone from Settings.
c
Select Quick Corner, and then press the [Enter] button.
35
p.71
Using the control panel