Connecting Manually - Epson EMP-7800 User Manual

Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network

Connecting Manually

If the name of the projector that you would like to set up mail notification
for does not appear in the window, use the following procedure to
manually connect the projector.
PROCEDURE
Start EMP NetworkManager.
1
Projector EMP482800... PROJECTOR01 PROJECTOR02 PROJECTOR03
address... 192.168.0.8 169.254.10.176 169.254.10.177 169.254.10.178
Room202 Room301 Room302 Room303 Room401
169.254.207.65 169.254.207.66 169.254.207.67 169.254.207.68 169.254.207.69
Double-click [Projector address selection] in the
2
projector list display area.
Room201
169.254.207.64
The following IP Address Setup window will be
3
displayed.
You should make the following settings when manually
connecting a projector.
IP address Enter the IP address for the projector to be connected.
Adds the projector with the specified IP address to the
[Add] button projector list display area. The window closes when
this button is clicked.
Connects the projector with the specified IP address
[Connect] button to the network. The window closes when this button
is clicked.
[Cancel] button Cancels entry of the IP address.
102