Connecting Antenna - Daewoo DTQ-3062SC User Manual

Hdtv monitor

Hide thumbs

Table Of Contents

Table of Contents

NOTE:

Bad picture reception could often be caused by bad antenna connection.

Be sure to check the antenna direction, its height, etc.

In case of using single antenna cable

VHF Antenna

UHF

Antenna

In case of using two separate antenna cables

VHF Antenna

LConnecting Antenna and Cable TV

Observe the following three common sources of input. [You have the option to connect one source, or as many as all three, at the same

time, when using a combiner-adapter, included with this HDTV Monitor.]

Three Sources of Input;

1) Coaxial Cable Feed [from cable company]

2) VHF Antenna [for local air reception of channels, 2~13]

3) UHF Antenna [for local air reception of channels, 14~69]

The included adapter allows for the most common combination of connections;

1) An "F connector" provides a connection for "Coaxial Cable".

2) A "Screw Terminal" provides connections for "VHF and UHF Antenna" sources, which commonly use "twin lead flat wire".

Special Notes;

Some "VHF or UHF Antennas" may be using "coaxial cable" instead of a "twin lead flat cable". In the event of connecting more than one

source using "coaxial cable", you may obtain a "coaxial cable combiner" (available at your local electronics store).

LTo Receive Cable Programs

Plug CATV coaxial cable in the

antenna socket (unit) at the back of

the TV set, and then, press

TV/CABLE selection button.

Coaxial Cable

In case of

coaxial cable

In case of

feeder cable

UHF antenna