Daewoo DP-42GM User Manual

Daewoo DP-42GM User Manual

Daewoo electronics user's manual plasma display
Hide thumbs Also See for DP-42GM:

Advertisement

DAEWOO ELECTRONICS CO., LTD.

PLASMA DISPLAY

USER'S MANUAL
D P - 4 2 G M
D P - 4 2 S M
D P - 4 2 WM
Before using the product, be advised
that you read this owner's manual well
and try to operate it.
Proper use guarantees
product life.
- Product Warranty is included -

Advertisement

Table of Contents
loading

Summary of Contents for Daewoo DP-42GM

  • Page 1: Plasma Display

    DAEWOO ELECTRONICS CO., LTD. PLASMA DISPLAY USER’S MANUAL D P - 4 2 G M D P - 4 2 S M D P - 4 2 WM Proper use guarantees product life. Before using the product, be advised that you read this owner’s manual well and try to operate it.
  • Page 2 Although PDP Monitor had an outstanding picture quality, there was a problem with the noise caused by cooling fan until now. DAEWOO PLASMA does not need cooling fan any more since it adopts self air circulation method with excellent heat transfer, eliminating the fan noise.
  • Page 3 F C C R F I N T E R F E R E N C E S T T E M E N T F C C R F I N T E R F E R E N C E S T T E M E N T NOTE : This equipment has been tested and found to comply with the limits for a...
  • Page 4: Safety Precautions

    Safety Precautions Always obey all During a lightning storm, or when it is left unattended and unused for a long period safety messages. of time, unplug it from the wall outlet. It can result in fire. • All the safety and operating instructions should be read before the...
  • Page 5 No objects filled with liquids, such as vases, shall be placed on the monitor. Spilled liquids may cause electric shock or fire. Do not disassemble batteries, and do not allow children to swallow them. Heavy metal may contaminate environment, and can be harmful or detrimental to human health.
  • Page 6 Safety Precautions Always obey all When moving your monitor, remove the power plug, antenna, and cables, and be safety messages. sure to move it by more than two people.. Failure to follow this instruction can result in • All the safety and electric shock or personal injury.
  • Page 7: During Use

    CAUTION You can be injured or this product or any other your property can be damaged if you do not follow instructions. Do not place heavy objects or heat sources on the power cord. It may damage the power cord, causing fire or electric shock.
  • Page 8: Checking Accessories

    Checking Accessories Supplied Accessories Remote Control AC Cable A/V Cable Note Check to be sure that the following items are packed with your Monitor. 1 UNIT Batteries (AAA) 1 UNIT PC(15pin) Cable 2 UNITS Audio Cable 2 UNITS 1 UNIT 1UNIT...
  • Page 9: Optional Accessories

    Table Top Stand Wall Mounting Unit Note The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local Dealer or the dealer from where you purchased the unit. DSP-SP20/SP21/SP22 - Speaker Main Unit Dimension : 3.94(W) x 24.72(H) 3.27(D)inch - Including Speaker Stand Dimension : 6.69(W) x 28.7(H) x 7.64(D)inch...
  • Page 11: Table Of Contents

    CONTENTS PREPARATION 4 • Safety Precautions 12 • Panel Controls 13 • Remote control BASICS 14 • Installation Instructions 15 • Connecting Speaker to PDP CONNECTION 16 • Watching Digital Broadcasts 18 • Watching Cable Broadcasts 20 • Watching Satellite Broadcasts 22 •...
  • Page 12: Panel Controls

    Front Panel, Back Panel, Remote Control Parts having same names in Plasma Display and Remote Control would function in exactly the same way. Front Rear AUDIO PC INPUT UPGRADE PORT PC INPUT Panel Controls Power STAND BY/OPERATE • Power control sensor •...
  • Page 13: Remote Control

    Remote Control The number in ( ) indicates the page in which the function of each button is explained in detail. Input Select button Used to select a desired input. Every press of the button cycles through the five different modes: Video 1 --> Video 2 -->...
  • Page 14: Installation Instructions

    Installation Instructions When Using the Stand * When installing PDP Main Unit, be sure it is done by more than 2 professionals. * For detailed installation information, refer to the User’s Manual, “STAND”. Take out the STAND from the package. Engage the assembled stand with 4 screws (M5) enclosed.
  • Page 15: Connecting The Speaker Cable

    Connecting the Speaker to the PDP Connecting the Speaker to the Stand Be sure to check if there is a sponge attached to the surface on which the speaker is contacted. Connecting the Speaker Cable • Connect one set (two cables) of the cable to the terminals on the back of the speaker in the way that red cable is for (+) terminal and black cable for (–) terminal.
  • Page 16: Watching Digital Broadcasts

    Watching Digital Broadcasts Watching Digital Broadcasts • To watch digital broadcasts: - Purchase a separate digital Broadcasting Receiver(SET-TOP BOX) - Connect the PDP to a Cable Broadcasting Receiver that is provided by a company which re- transmits digital broadcasts. Connect a Digital Broadcasting Receiver to the •...
  • Page 17: Input Select

    Input Select • Select [Component 1 or Component 2] by pressing the INPUT SELECT button of the INPUT SELECT Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Component 1 --> Component 2 -->...
  • Page 18: Watching Cable Broadcasts

    Watching Cable Broadcasts Watching Cable Broadcasts • To watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then, connect the digital set-top box for cable TV to the PDP as shown below. Connect a CABLE Broadcasting Receiver to the PDP.
  • Page 19 Input Select • Select [Video 1 or Video 2] by pressing the INPUT SELECT button of the Remote INPUT Control or the PDP unit. SELECT • Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Video 1 --> Video 2 -->...
  • Page 20: Watching Satellite Broadcasts

    Watching Satellite Broadcasts Watching Satellite Broadcasts • To watch satellite broadcasting, subscribe to a Digital Satellite Broadcasting, then connect the digital set-top box for satellite broadcasting to the PDP as shown below. Connect a Satellite Broadcasting Receiver the PDP. • Prepare the A/V connecting cable. •...
  • Page 21 Input Select • Select [Video 1 or Video 2] by pressing the INPUT SELECT button of the INPUT Remote Control or PDP unit. SELECT • Each time you press INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 --> Video 2 -->...
  • Page 22: Watching A Dvd Image

    Watching a DVD Image Watching a DVD Image • Component Input is set to 480i and 480p mode. • Connect the cable from the DVD Video Output (Y, Pb/Cb, Pr/Cr) to the Component Input at the back PDP, and connect the cable from DVD Audio output (Left, Right) to the Audio Input at...
  • Page 23 Input Select • Select [Component 1 or Component 2, Video1, Video2] by pressing the INPUT INPUT SELECT SELECT button of the Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: Component 1 -->...
  • Page 24: Watching A Vcr Image

    Watching a VCR Image Watching a VCR Image • Video can use either the normal video terminal or the S-video terminal. Connect a VCR to the PDP. • Prepare the AV cable. • Connect the Video(Output) to PDP(Video Input) as shown below. AUDIO PC INPUT UPGRADE PORT...
  • Page 25 Input Select • Select [Video 1 or Video 2] by pressing the INPUT SELECT button INPUT SELECT of Remote Control or PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 -->...
  • Page 26: Watching A Camcorder/Game Console Image

    Watching a Camcorder/Game Console Image Watching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP. Connect a Camcorder/Game Console to the PDP. • Prepare the AV cable. • Connect the Video(Output) to the PDP(Video Input) as shown below. •...
  • Page 27 Input Select • Select [Video 1 or Video 2] by pressing the INPUT SELECT button INPUT SELECT of the Remote Control or the PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: Video 1 -->...
  • Page 28: Connecting Pc

    Connecting PC • DAEWOO PLAZMA supports resolution of VGA, SVGA, XGA, SXGA, UXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of PC. • This product is not supported by Plug and Play, so select...
  • Page 29: Press The Power Button

    Press the Power button. • Turn on the PDP and the PC. Input Select INPUT SELECT Video1 Enjoy Dynamic Ultra Screen Monitor by Using PC’s Keyboard or Mouse. NOTES: 1) The resolution of the PC monitor is best at 640 x 480 (VGA). 2) If there is a [Vertical Frequency]setting menu in the [Display] Menu of the PC, adjust the frequency to 60Hz.
  • Page 30 PC Input Resolution Available in PDP Resolution 640x350 640x400 640x480 720x400 720x480 720x576 800x600 832x624 1024x768 1152x864 1152x900 1280x720 1280x960 1280x1024 1600x1200 Horizontal Frequency(KHz) Vertical Frequency(Hz) 31.469 37.861 24.823 30.48 31.469 37.861 31.469 37.861 37.5 39.375 43.269 31.47 31.469 37.927 31.54 15.63 35.156...
  • Page 31: Selecting Auto Picture Mode

    Selecting Picture Mode • Press the [PICTURE MODE] on the Remote Control. • Pressing the [PICTURE MODE] first time will display the current PICTURE MODE. PICTURE MODE Each Press of the Button Will Select One of Four Picture Modes. PICTURE MODE Normal * Normal :...
  • Page 32: Customizing Picture

    Customizing Picture Customizing Picture • You can adjust the color tone and brightness to your preference. INPUT POWER SELECT DISPLAY ZOOM- ZOOM+ MENU PICTURE SCREEN MODE MODE FREEZE SOUND MUTE SLEEP MODE Press the MENU Button. • The MENU shown below will display on the screen. MENU Picture Sound...
  • Page 33: Picture Condition Adjustments

    Select User Mode Adjustments • While you are in [Picture Mode – User], press the select a specific adjustment item. Picture Condition Adjustments NOTES: * While you are in the PC INPUT mode, you can only adjust brightness, contrast, sharpness and color temperature. * When you adjust Brightness, Contrast, Color, Tint in DTV or PC mode, the picture is adjusted finely.
  • Page 34: Adjusting Screen Size

    Adjusting Screen Size Adjusting Screen Size • You can adjust screen size or aspect ratio as desired. INPUT POWER SELECT DISPLAY ZOOM- ZOOM+ MENU PICTURE SCREEN MODE MODE FREEZE SOUND MUTE SLEEP MODE Press the SCREEN MODE Button. • Each time you press the SCREEN MODE button on the Remote Control, a different SCREEN MODE appears.
  • Page 35: Menu Screen

    Press the MENU Button. • Press the [MENU] button on the Remote Control. MENU Picture Sound Screen Utility Input Select “Screen”. • Press the Channel Select the Screen Size. • Press the Volume / Picture Sound Screen Utility Input Mode Normal Brightness Contrast...
  • Page 36: Adjusting Screen Position And Size

    Adjusting Screen Position and Size Adjusting Screen Position and Size • You can adjust the screen position and size as desired. • This function is only used when adjusting the screen position and size on the PDP monitor by using the PC input signal.
  • Page 37 Press the Volume / Buttons. • Press the Volume / buttons to select “Screen”. • While you are in ‘Screen’ mode, press the then, adjust the value by pressing NOTES: 1) Horizontal/Vertical size and position values can be adjusted only in the [PC] input mode.
  • Page 38: Enlarging Screen Size

    Enlarging Screen Size Enlarging Screen Size • You can view enlarged size of the screen with this function INPUT POWER SELECT DISPLAY ZOOM- ZOOM+ MENU PICTURE SCREEN MODE MODE FREEZE SOUND MUTE SLEEP MODE Press the ‘ZOOM+’ Button. • Press the ‘ZOOM+’ button to show currently selected screen size.
  • Page 39 Move the Screen Position. • While you are in the ‘Zoom’ mode, press the / buttons to move screen stepwise up/down, left/right, respectively. NOTES: * When the screen is enlarged, the pixel of the screen can become thick and dim. * When only subtitle of zoom level remains, you can scroll the image.
  • Page 40: Watching A Still Image

    Watching a Still Image Watching a Still Image • You can view still images temporarily with this function. However, displaying the same images such as still images for a long time may cause after-image lagging. INPUT POWER SELECT DISPLAY ZOOM- ZOOM+ MENU PICTURE...
  • Page 41: Adjusting Auto Sound Mode

    Select SOUND Mode. • Press the [SOUND MODE] on the Remote Control. • Press of the [SOUND MODE] for the first time will display the current SOUND SOUND MODE. MODE Every Press of the Button Changes Modes. SOUND MODE Normal Movie * Normal : Suitable for watching any motion picture * Movie...
  • Page 42: Customizing Sound Mode

    Customizing Sound Mode Customizing Sound Mode • This feature allows the user at adjust at his preference. INPUT POWER SELECT DISPLAY ZOOM- ZOOM+ MENU PICTURE SCREEN MODE MODE FREEZE SOUND MUTE SLEEP MODE Press the MENU Button. • The MENU Screen as below will be displayed. MENU Picture Sound...
  • Page 43 Select the Spatial Effect Mode. • Select Spatial Effect by pressing the pressing the • Spatial Effect: Used to feel grotesque by emphasizing stereo effect. Picture Sound Screen Utility Input Select the SOUND Mode. • Select the Sound Mode by pressing the adjust it by pressing the / buttons.
  • Page 44: Selecting Input Signal

    Selecting INPUT SIGNAL INPUT SIGNAL • Used to select INPUT signal of external device connected to the PDP. INPUT POWER SELECT DISPLAY ZOOM- ZOOM+ MENU PICTURE SCREEN MODE FREEZE MODE SOUND MUTE SLEEP MODE Press the INPUT SELECT Button. • Press the [INPUT SELECT] button on the Remote Control or INPUT the PDP Display to select [COMPONENT 1] or [COMPONENT SELECT...
  • Page 45 Press the MENU Button. • Press the [MENU] button on the Remote Control. MENU Picture Sound Screen Utility Input Select INPUT. • Select [INPUT] by the Select INPUT SIGNAL. • Select [INPUT SIGNAL] by the then press the Picture Sound Screen Utility Input...
  • Page 46: Checking The Current Input Signal

    Indicates the mode and frequency of the current INPUT signal. NOTES: 1) DAEWOO PLASMA can receive NTSC, PAL, SECAM, etc. 2) “1920 x 1080” displayed in the INPUT signal does not indicate the resolution of the monitor, but the signal that is sent by Digital Broadcasting Receiver.
  • Page 47 Press the MENU Button. • The MENU screen will be displayed as below. MENU Picture Sound Screen Utility Input Press the • Select [Utility] by the Select the MENU Background Screen. • Select the [MENU Background Screen] by pressing the •...
  • Page 48: Selecting Menu Background Screen And Languages

    Selecting MENU Background Screen and Languages INPUT POWER SELECT DISPLAY ZOOM- ZOOM+ MENU Back to Initialization • You can restore the values of the adjustment/setting made in the MENU to factory settings. Select MENU LANGUAGE SELECT by the Button. • Select LANGUAGE by the •...
  • Page 49: Setting Sleep Timer

    Press the SLEEP Button. • Press the [SLEEP] button on the Remote Control. • Pressing the [SLEEP] button first time will display the current setting for SLEEP TIMER. • To cancel the SLEEP TIMER, press the SLEEP to select ‘OFF’. Sleep Timer Sleep Timer 15 Minutes...
  • Page 50: Before Requesting Service

    Before Requesting Service Before requesting for a service, check the following points once again. • Remote control does not function properly. • Check for any obstacle between the Remote Control and the Display. • Check for dead batteries and incorrect battery orientation. •...
  • Page 51: Specifications

    In the event that the product has been submerged in the water in rainy season: Immediately wash it with clean water, and dry it in ashadow place, then call for service from the nearest Daewoo Service Center. Never plug the Power Cord since there is risk of electric shock and SPECIFICATIONS damag of the product.

This manual is also suitable for:

Dp-42smDp-42wm

Table of Contents