Table of Contents
Advertisement
2
PRODUCT FEATURES
•
The convenient and user-friendly on-screen display
allows for easy and accurate adjustments of horizontal
and vertical screen size and position, geometry and
screen color.
•
The monitor supports a safe working environment in
strict compliance with the MPR II standard for low
emissions(TCO 95 optional).
•
The monitor complies with the VESA Display Data
Channel (DDC) specification for Plug and Play
compatibility. Advanced microcircuitry makes setup
and configuration fast and effortless.
•
The monitor features Advanced Color Controls for
fine-tuning to meet your own personal tastes or
application requirements. Use the on-screen controls
to adjust the color temperature, RGB gain value for
the best possible screen color and intensity.
•
Press the menu button and activate the Self-Diagnosis
menu to determine whether your monitor is
functioning normally, not receiving a signal or is
receiving a signal that is out of scanning range.
•
Activate the higher refresh rates of the monitor to
stabilize the screen and eliminate the annoying flicker
that contributes to eye-strain and headaches.
•
The "borderless" full-screen display capability works
under all graphic modes and provides a larger viewing
area than conventional monitors, giving you a better
picture with more workspace.
CONNECTING THE SIGNAL CABLE AND
POWER CORD
1. Turn off the computer and monitor.
2. Connect the 15-pin D-sub connector to the output port
of the video card in your computer.
3. Tighten the screws of the connector.
4. Plug the power cord into the AC receptacle located on
the back of the monitor.
5. Plug the other end of the power cord into the AC outlet.
3
Signal Cable
Power Cord
Advertisement
Table of Contents
