Product Features; Setup; Connecting The Signal Cable And Power Cord - Daewoo L510B User Manual

PRODUCT FEATURES

•
The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of horizontal and vertical
screen size,position and screen color.
•
The monitor supports a safe working environment in strict
compliance with the TCO 99 standard for low emissions .
•
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
•
The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements.
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and
intensity.
•
Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of
scanning range.
•
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
•
The "borderless" full-screen display capability works under all
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace.
•
The monitor supports the optimal display performance with
1024x768 at 75Hz.
English - 2

SETUP

CONNECTING THE SIGNAL CABLE AND
POWER CORD
1. Turn off the computer and monitor.
2. Connect the 15 pin D-sub connector to the output port of the
video card in your computer and monitor.
3. Tighten the screws of the connector.
4. Plug the power cord into the AC receptacle located on the back
of the monitor.
5. Plug the other end of the power cord into the AC outlet.
D-Sub
Connector
Power
Cord
English - 3