Daewoo DTQ-3062SC User Manual page 30

1. Press "MENU" button.
Picture
Move Sel. Exit
2. Select "Picture" by using "CHANNELx x " button.
Picture
Brightness 32
Contrast 60
Sharpness 32
Color 32
Tint 32:32
Picture NR Off
Move Adj. Prev.
3. Press "CHANNELx x /y y " buttons.
Picture
Brightness 32
Contrast 60
Sharpness 32
Color 32
Tint 32:32
Picture NR Off
Move Adj. Prev.
4. Press "MENU" button twice.
•Press this button one time, and the menu window appears.
Press it again, and you will get the previous status of the menu window.
(Menu disappears)
•The screen appears as follows :
•Move the cursor to the "Picture" menu by using
"CHANNEL x" button.
•When "Picture" mode is selected, its sub-menu
appears on the screen.
•Continue to press "CHANNELx/y" buttons, and the
entries of this sub-menu turn blue in the sequence as
follows : Brightness Contrast
Color Tint
•Select "Picture NR" function by using "VOLUMEC/B"
buttons, and then, "On" and "Off" repeat in turn.
•Select "On".
Picture Noise Reduction
Sharpness
Picture NR
LLow transmission signals may cause
bad picture or noise.
LThis function corrects this type of
problem.
LTo eliminate or reduce picture noise,
press to select "On" in "Picture NR"
mode of "Function" sub-menu.
30