How To Prepare The Power Source - Omron Micro A-I-R NE-U22 Instruction Manual

EN-p2-20-(NE-U22)-3

How to Prepare the Power Source

Connect the unit to the power source before starting to use it.
Use batteries or optional AC Adapter as the power source.
How to use the optional AC Adapter
Please note that this AC Adapter is not a battery charger.
1 Place the Main Unit on the AC Adapter
Connection Stand as shown in the Figure.
Main Unit Locking Board
2 Plug in the power plug of AC Adapter to the electric outlet.
How to remove the AC Adapter from the Main Unit
(1) Unplug the power plug from the
electric outlet.
(2) Unlock the Main Unit by pushing in
both ends of the Main Unit Locking
Board of the AC Adapter Connection
Stand with your fingers.
3/25/02 4:48 PM
Main Unit Locking Board
Page 8
- Push in the AC Adapter until it clicks
and is locked to the Stand.
Connection is completed.
(2) Push both ends to
remove the Main Unit.
8
(1) Unplug