How To Fill The Medication - Omron Micro A-I-R NE-U22 Instruction Manual

EN-p2-20-(NE-U22)-3

How to Fill the Medication

Remove the Mask Adapter, Mouthpiece, or Inhalation Mask (S), then fill the
medication.
1 Remove the Medication
Bottle from the Main Unit.
Lift up the Medication Bottle by
pushing in the Medication Bottle
Disengaging Buttons on both sides
and releasing the engagement.
2 Remove the Mesh Cap.
Hold the Medication Bottle as if by
covering it with your hand.
3 Fill the medication.
Fill the medication as shown in the
Figure.
- The maximum capacity of
Medication Bottle is 7 ml.
4 Install the Mesh Cap.
- If the Mesh Cap is not securely
closed, medication may leak.
3/25/02 4:48 PM Page 10
Medication Bottle
Disengaging Button
Lift up the Mesh Cap by
applying your thumb on
the brim.
Align these points,
then push in as far
as it goes.
Do not open
the Bottle Cap.
Insert the Mesh Cap
perpendicular to the
Medication Bottle.
10
Lift up the
Mesh Cap
perpendicular
to the
Medication
Bottle.
Do not insert your
finger into the
Nebulization Port.
Close the Mesh Cap
securely.
Do not insert your
finger into the
Nebulization Port.