Message Alert - Panasonic KX-TG2622 Operating Instructions Manual

Listening to Voice Mail
messages
The unit lets you know that you have new
Voice Mail messages in the following
ways:
– "Voice Mail" is displayed on the
handset.
– The message indicator on the handset
flashes slowly if message alert feature is
turned on.
1
Press {C}, then press {VM} within 15
seconds.
L If {VM} is not displayed, the Voice
Mail access number has not been
stored. Store the number (page 32).
OR
{MENU} i "V.M. access" i
{Select}
L The speakerphone turns on.
2
Follow the prerecorded instructions.
3
Press {OFF} when finished.
Note:
L If "Voice Mail" still remains on the
display even after you have listened to
new messages, turn it off by pressing
and holding {OFF} until the handset
beeps.
L If your Voice Mail service uses Voice
Mail tones and the message is over 3
minutes long, the handset may not
indicate new messages.
For assistance, please visit http://www.panasonic.com/phonehelp
L If your Voice Mail service uses Voice
Mail tones, the tones are heard from any
phone connected to the same line. If you
want to use another phone to listen to
Voice Mail messages, you have to dial
your access number manually.

Message alert

Message alert controls the message
indicator on the handset once it turns on,
message indicator will flash slowly when
there are new recorded messages in the
Voice Mail system.
1
{MENU} i {0}{#}
2
Select the desired setting. i {Save}
i {OFF}
Note:
L While message alert is on, battery
operating time is shortened.
Voice Mail Service
33