Table of Contents
Advertisement
Plumb and square door.
Check the interior reveal.
Fasten the door to opening
Carefully open the door(s)
Double door with Center Latch:
For Out-Swing Standard Installation Applications Only: Install sill screws.
SILL SCREWS FOR ARCHITECT SERIES PERFORMANCE UPGRADE AND
DOORS WITH HURRICANESHIELD IMPACT-RESISTANT GLASS ARE
INSTALLED IN STEP 5.
For Low Profi le Sills through each installation screw hole drill a 1/8" pilot;
Remove sill strike screws from the sill strike located on the door sill.
16d galvanized
finishing nails
E x t e r i o
r
Advertisement
Table of Contents
