Finding And Storing Active Frequencies - Radio Shack PRO-2067 Owner's Manual

FINDING AND STORING
ACTIVE FREQUENCIES
You can search for transmissions
within ten ranges of frequencies,
called a search bank. The search
bank is divided into ten search bands.
You can change the bands with the
preprogrammed search bands in the
scanner. You can also change the
search bank's search ranges manual-
ly.
Notes:
• You can use the scanner's delay
feature while searching the ser-
vice bank. See "Using Delay" on
Page 30.
• The scanner does not search
locked-out
searching ranges.
Searching a Preprogrammed
Frequency Range
The scanner contains these prepro-
grammed search ranges, stored in
search banks (0–9).
Search Search
Bank Range (MHz)
0 460–460.625
1 153.725–
156.000
2 462.925–
463.175
frequencies while
Description
Police
Police/Fire
Medical
Search Search
Bank Range (MHz)
3 118.000–
136.00
4 156.250–
157.425
5 866.000–
868.9875
6 50.000–
54.000
7 144.000–
148.000
8 440.000–
450.000
9 462.550–
462.725
Follow these steps to select prepro-
grammed search ranges and search
them for active frequencies.
1. Press
SEARCH
searches the active search bank.
Current
Search
Bank
Note: To reverse the search
direction, press
2. Using the number keys, enter the
search bank number for each
search range you want to select or
remove.
Description
Aircraft
Marine
800 MHz
6 Meter
Ham
2 Meter
Ham
70 cm Ham
User Bank
. The scanner
or .
25