Table of Contents
Advertisement
OPTIONAL DOLLAR BILL ACCEPTOR
THE COIN DOOR ASSEMBLY USED ON CRAZY TAXI STANDARD COMES
EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING
CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR
THIS APPLICATION.
THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDATORS:
HOLE POSITION#1
(FORWARD-MOST POSITION)
HOLE POSITION#2
HOLE POSITION #3
HOLE POSITION #4
*The back flange on the chute can be removed for hold position #4. If the flange is
not removed, it may interfere with the back of the cabinent.
The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series
upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one
entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls
authorized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars
distibutor.
Mars 2000 series
Mars 2000 series
DBV45 (JCM)
CURRENTLY NOT USED
DSI01*
41
www.seuservice.com
Advertisement
Table of Contents
