Sega Jambo!Safari Owner's Manual page 44

Table of Contents

Advertisement

OPTIONAL DOLLAR BILL ACCEPTOR
THE COIN DOOR ASSEMBLY USED ON JAMBO SAFARI
EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED
WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE
GAME FOR THIS APPLICATION.
THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING
VALIDATORS:
HOLE POSITION#1
(FORWARD-MOST POSITION)
HOLE POSITION#2
HOLE POSITION #3
HOLE POSITION #4
*The back flange on the chute can be removed for hold position #4.
If the flange is not removed, it may interfere with the back of the
cabinent.
The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series
upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one
entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls
authorized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars
distibutor.
JAMBO SAFARI
JAMBO SAFARI COMES
JAMBO SAFARI
JAMBO SAFARI
Mars 2000 series
Mars 2000 series
DBV45 (JCM)
CURRENTLY NOT USED
DSI01*
41

Advertisement

Table of Contents
loading

Table of Contents