Table of Contents
Advertisement
4 . ASSEMBLING AND INSTALLATION
Assembling should be performed as per this manual. Since this is a
complex machine, erroneous assembling may cause damage to the
machine, or malfunctioning to occur.
When assembling, be sure to perform work by plural persons.
Depending on the assembly work, there are some cases in which
performing the work by a single person can cause personal injury or
parts damage.
When carrying out the assembly work, follow the procedure in the following 5-item sequence:
1
ASSY OF THE REAR CABI (COCKPIT)
2
ASSY OF BILLBOARD
3
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
4
POWER SUPPLY
5
ASSEMBLING CHECK
Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width
across flats are required for the assembly work.
1
ASSY OF REAR CABI (COCKPIT)
Permanantly tightening
the hex bolts should
not be completed until
the leg levelers are
adjusted properly.
9
Advertisement
Table of Contents
