Gas Council Numbers; Identification Plate - Vaillant ecoTEC exclusive 832 Installation And Maintenance Instructions Manual

i
Vaillant Ltd. supports the Benchmark Initia-
tive. You will find the Benchmark Logbook on
the last page of this instruction manual. It is
very important that this document be filled
out properly when installing, commissioning
and handing-over to the operator of the
installation.
Benchmark places responsibilities on both
manufacturers and installers. The purpose is
to ensure that customers are provided with
the correct equipment for their needs, that it
is installed, commissioned and serviced in
accordance with the manufacturer's instruc-
tions by a competent person approved at the
time by the Health and Safety Executive and
that it meets the requirements of the appro-
priate Building Regulations.
The Benchmark Checklist can be used to dem-
onstrate compliance with Building Regulations
and should be provided to the customer for
future reference. Installers are required to
carry out installation, commissioning and
servicing work in accordance with the Bench-
mark Code of Practice which is available from
the Heating and Hot water Industry Council
who manage and promote the Scheme.
- Visit "www.centralheating.co.uk" for more
information.
1.5

Gas council numbers

Appliance
ecoTEC exclusive 832
ecoTEC exclusive 838
Table 1.1 Gas council numbers
1.6

Identification plate

The identification plate the Valliant ecoTEC exclusive is
attached at the factory to the bottom of the appliance.
Installation and maintenance instructions ecoTEC exclusive 0020017768_07
Gas council numbers
47 044 37
47 044 38
Notes on the documentation 1
5