Button
Press to display max, min and average values.
MAXMIN
Press EXIT to stop and return to current measurement mode.
(UT71A only)
In Setup, each press to decrement an Option.
SEND
Press to display max, min and average values.
MAXMIN
Press EXIT to stop and return to current measurement mode.
(UT71B only)
Press to output the data, AUTO mode switch off. The primary
display shows "SEND".
Press EXIT to exit.
In Setup, each press to decrement an Option.
In Recall, each press to go back to the previous stored reading.
In Store, each press to decrease a second on the storing
interval.
Press EXIT to exit
18
Table 2-2. Functional Buttons
Description
Model UT71A/B: OPERATING MANUAL
Access Method
Press the button once.
Press the button once after entering
SEND mode.
Press the button once.
Press and hold
the button for over 1 second.
Press the button once after entering
SEND mode.